Campionatore ir
devhardesian·campionatore-ir·hardware/ESP32custom.kicad_pcb
About the Campionatore ir PCB
Campionatore ir is an open source ESP32 PCB design by devhardesian, published on GitHub under the MIT license. It is a 2-layer board measuring 48.7 × 37.1 mm, with 17 components from 14 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2SC6 and AP2112K-3.3. By type, the board carries 6 resistors, 4 capacitors, 3 ICs, 2 diodes, 1 transistor and 1 connector.
It belongs with the iot & wireless designs in this gallery.
From the project
Universal infrared remote on ESP32-S3: raw IR capture and playback, PWA served by the device, KiCad 2-layer PCB with production files.
Telecomando universale a infrarossi che funziona senza app né cloud.
Un ESP32-S3 registra il segnale grezzo di qualsiasi telecomando IR e lo ritrasmette con la stessa portante. I telecomandi si creano e si usano da una web app installabile (PWA) servita direttamente dal dispositivo: basta un browser sulla rete di casa, oppure sulla rete Wi-Fi che il dispositivo crea da solo.

Main components on the Campionatore ir
Campionatore ir bill of materials (BOM)
17 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | AP2112K-3.3 | SOT-23-5 | U4 |
| 1 | BC818 | SOT-23 | Q1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | SFH4346 | LED_D3.0mm_IRBlack | D2 |
| 1 | SFH203FA | LED_D5.0mm_IRGrey | D3 |
| 2 | 10u | C_0805_2012Metric | C1, C3 |
| 1 | 1u | C_0603_1608Metric | C2 |
| 1 | 100n | C_0603_1608Metric | C4 |
| 2 | 10k | R_0603_1608Metric | R1, R5 |
| 1 | 20 | R_1206_3216Metric | R2 |
| 2 | 5k1 | R_0603_1608Metric | R3, R6 |
| 1 | 470 | R_0603_1608Metric | R4 |
Campionatore ir design files
The KiCad project lives in the devhardesian/campionatore-ir repository on GitHub; these links point at the commit this page was built from.
Campionatore ir: common questions
What microcontroller does the Campionatore ir use?
The Campionatore ir is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Campionatore ir PCB?
The Campionatore ir measures 48.7 × 37.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Campionatore ir?
17 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Campionatore ir design files?
From the devhardesian/campionatore-ir repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Campionatore ir design in my own project?
Yes, under the terms of its MIT license, which devhardesian chose for the repository.
Can I test firmware for the Campionatore ir without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k