Open-E-Pin

DevonHope·Open-E-Pin·hardware/kicad/open-e-pin.kicad_pcb

Open-E-Pin PCB layout, top view — open source Nordic nRF board by DevonHope

About the Open-E-Pin PCB

Open-E-Pin is an open source Nordic nRF PCB design by DevonHope, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 56 × 52.5 mm, with 53 components from 30 distinct parts.

Its main chip is the MDBT50Q-1MV2, from the Nordic nRF family. Other key parts include the BQ25101, TPS7A0230, TPS22916C and USBLC6-2SC6. By type, the board carries 22 capacitors, 12 resistors, 5 ICs, 3 transistors, 3 connectors and 3 diodes.

It belongs with the power & battery designs in this gallery.

From the project

KiCad 7 project for the main board. The schematic and board are generated from scripts/design.py, which lists every part and every connection. Change the design there, then regenerate, so the schematic and board never drift apart.

KiCad 7 project for the main board. The schematic and board are generated from scripts/design.py, which lists every part and every connection. Change the design there, then regenerate, so the schematic and board never drift apart.

Needs KiCad 7 and its Python module (pcbnew). On Linux the system python3 has it; on Windows use the Python that ships with KiCad (C:\Program Files\KiCad\7.0\bin\python.exe) and set KICAD7SYMBOLDIR and KICAD7FOOTPRINTDIR to KiCad's share\kicad\symbols and share\kicad\footprints folders.

Open-E-Pin, from the project README
From the project README

Main components on the Open-E-Pin

MDBT50Q-1MV2BQ25101TPS7A0230TPS22916CUSBLC6-2SC6

Open-E-Pin bill of materials (BOM)

53 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MDBT50Q-1MV2
U1
1
BQ25101
U2
1
TPS7A0230
U3
1
TPS22916C
U4
1
USBLC6-2SC6
U5
1
DMG2305UX
Q1
1
DMG1012T
Q2
1
NX3008NBK
Q3
1
USB-C
J1
1
BATT JST-PH
J2
1
GDEH0169E02
J3
1
0.1A hold
F1
1
BUTTON
SW1
1
10k B3380
TH1
1
red
LED1
3
NSR0530H
D1, D2, D3
1
47UH
47uH
L1
15
1u 25V
C1, C10, C11, C12, C13, C14, C15, C16 +7
1
1u 10V
C2
2
1u
C3, C4
Show 10 more
QtyPartRefs
2
100N
100n
C5, C7
1
4.7U
4.7u
C6
1
1u 35V
C20
1
4.53K
4.53k
R1
3
10M
R2, R3, R4
2
100K
100k
R5, R14
2
5.1K
5.1k
R6, R7
1
0.47
R8
1
2.2K
2.2k
R11
2
10K
10k
R12, R15

Open-E-Pin design files

The KiCad project lives in the DevonHope/Open-E-Pin repository on GitHub; these links point at the commit this page was built from.

Open-E-Pin: common questions

What microcontroller does the Open-E-Pin use?

The Open-E-Pin is built around the MDBT50Q-1MV2, from the Nordic nRF family.

How big is the Open-E-Pin PCB?

The Open-E-Pin measures 56 × 52.5 mm, has 4 copper layers and is 0.8 mm thick.

How many components are on the Open-E-Pin?

53 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Open-E-Pin design files?

From the DevonHope/Open-E-Pin repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Open-E-Pin design in my own project?

Yes, under the terms of its GPL-3.0 license, which DevonHope chose for the repository.

Can I test firmware for the Open-E-Pin without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards