50 open source boards using the MDBT50Q-1MV2
Real designs built with the MDBT50Q-1MV2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Dcmini
dcmini-org
127 × 86.5 mm189 parts2LCERN-OHL-P-2.07Nordic nRF
Tympan Rev F
Tympan
38 × 74 mm86 parts4LCERN-OHL-P-2.07Nordic nRF
Bifrost left
hringdrifi
142.9 × 80.3 mm40 parts2LCERN-OHL-P-2.03Nordic nRF
Keyboard
GlassyBridge
314.3 × 137 mm356 parts2LMIT2Nordic nRF
Macro-Keyboard v4
NikolasKelava
81 × 112.2 mm65 parts4LMIT2Nordic nRF
SF65
ericrlau
304.8 × 122.7 mm178 parts2LCC-BY-SA-4.01Nordic nRF
SofleKeyboard
bhadkamkar9snehil
143.4 × 111.8 mm95 parts2LMIT1Nordic nRF
Nrf52840-macro controller
alex1klimovich
96 × 74 mm72 parts2LNo license1RP2040/RP2350
CTRL-AI-Macropad
RishabhMewada
96.3 × 68.8 mm22 parts2LMIT1Nordic nRF
Hyper7-Evo
ReFil
552.5 × 164.5 mm841 parts2LNo license0Nordic nRF
Chonc60
mildlyfunctionalgays
297 × 132 mm356 parts2LNo license0Nordic nRF
Keyboard
chen-gz
305.1 × 117.2 mm183 parts4LNo license0Nordic nRF
Ashiyu (tomtho slim mk2)
lou12de39r
275.8 × 106.3 mm164 parts2LNo license0Nordic nRF
Tomtho slim
lou12de39r
262 × 93.5 mm130 parts2LNo license0Nordic nRF
Shotpuck panel
Rixard86
91 × 88.6 mm108 parts2LNo license0Nordic nRF
Keychain rev b panel
olerast67
76 × 72 mm98 parts4LApache-2.00ESP32
Nx-PCBA
jgrano
110 × 85 mm78 parts2LNo license0Nordic nRF
Aura a04
Avinash1286
35.2 × 35.2 mm72 parts4LMIT0Nordic nRF
ErgoV
vibsthebot
133.4 × 86.2 mm63 parts2LNo license0Nordic nRF
Thintyl main
namachan10777
34.5 × 70.5 mm58 parts2LMIT0Nordic nRF
Nami
jemdiggity
95 × 75 mm54 parts2LNo license0Nordic nRF
Open-E-Pin
DevonHope
56 × 52.5 mm53 parts4LGPL-3.00Nordic nRF
Football gnss tracker
Bouhafs-Aek
42 × 72 mm44 parts4LNo license0Nordic nRF
Dao iidx board
Decuplequart
80 × 57 mm34 parts2LMIT0Nordic nRF
Pmd tracker
ollielarkins
45 × 30 mm30 parts4LNo license0Nordic nRF
LightStick
f0reachARR
23 × 36.5 mm22 parts2LNo license0Nordic nRF
Pomodorov2
twopoint718
56 × 41.4 mm19 parts2LNo license0- schematic only · 16 partsNordic nRF
AEGIS
callmerishi1508
16 partsAGPL-3.00 Nordic nRF
Bifrost right
hringdrifi
142.9 × 80.3 mm36 parts2LCERN-OHL-P-2.03Nordic nRF
Carrier
bhadkamkar9snehil
62 × 28 mm44 parts4LMIT1Nordic nRF
ErgoVright
vibsthebot
133.4 × 86.2 mm63 parts2LNo license0Nordic nRF
Aura a03
Avinash1286
24 × 42 mm61 parts4LMIT0Nordic nRF
Keychain rev b
olerast67
30 × 52.5 mm49 parts4LApache-2.00Nordic nRF
Shotpuck
Rixard86
36 × 34.8 mm27 parts2LNo license0Nordic nRF
Bifrost right trackball
hringdrifi
18.6 × 20.2 mm12 parts2LCERN-OHL-P-2.03Nordic nRF
Carrier chk
bhadkamkar9snehil
62 × 28 mm44 parts4LMIT1
How designs wire the MDBT50Q-1MV2
Read from the KiCad layouts of 28 open source designs, one per repository: what each pin of the MDBT50Q-1MV2 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 20 of 27 designs, most often 100 nF (then 10 µF).
- The P0.09 pin is left unconnected on 24 of 27 designs (a signal on 3).
- The P0.10 pin is left unconnected on 24 of 27 designs (a signal on 3).
- The P1.01 pin is left unconnected on 23 of 27 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 2, 15, 33, 55 | Connected to: GND 98% | — |
| P1.10pin 3 | Connected to: Not connected 71% · a signal 29% | — |
| P1.12pin 5 | Connected to: Not connected 68% · a signal 32% | — |
| P1.13pin 6 | Connected to: Not connected 64% · a signal 36% | — |
| P1.14pin 7 | Connected to: Not connected 71% · a signal 29% | — |
| P1.15pin 8 | Connected to: Not connected 71% · a signal 29% | — |
| P0.03pin 9 | Connected to: Not connected 64% · a signal 36% | — |
| P0.28pin 13 | Connected to: Not connected 68% · a signal 32% | — |
| P0.26pin 19 | Connected to: Not connected 61% · a signal 39% | — |
| P0.05pin 21 | Connected to: Not connected 71% · a signal 29% | — |
| P0.07pin 23 | Connected to: Not connected 75% · a signal 25% | — |
| P1.08pin 25 | Connected to: Not connected 78% · a signal 22% | — |
| P0.11pin 27 | Connected to: Not connected 74% · a signal 26% | — |
| VDDpin 28 | Connected to: 3.3V 85% |
|
| P0.12pin 29 | Connected to: Not connected 78% · a signal 22% | — |
| VDDHpin 30 | Connected to: 3.3V 81% |
|
| DCCHpin 31 | Connected to: Not connected 67% · a signal 30% | — |
| VBUSpin 32 | Connected to: VBUS 67% · a signal 19% |
|
| P1.02pin 50 | Connected to: Not connected 63% · a signal 37% | — |
| P0.09pin 52 | Connected to: Not connected 89% | — |
| P0.10pin 54 | Connected to: Not connected 89% | — |
| P1.04pin 56 | Connected to: Not connected 74% · a signal 26% | — |
| P1.06pin 57 | Connected to: Not connected 67% · a signal 33% | — |
| P1.07pin 58 | Connected to: Not connected 81% · a signal 19% | — |
| P1.05pin 59 | Connected to: Not connected 78% · a signal 22% | — |
| P1.03pin 60 | Connected to: Not connected 81% · a signal 19% | — |
| P1.01pin 61 | Connected to: Not connected 85% | — |
30 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dcmini by dcmini-org, Tympan Rev F by Tympan, Knuckles controller by fcoury and Bifrost left by hringdrifi.
The MDBT50Q-1MV2 in open source designs
The gallery holds 50 open source boards using the MDBT50Q-1MV2 from 29 GitHub repositories; a typical one measures about 76 × 70.5 mm and carries around 61 components.
51% use four copper layers or more, and 64% carry an open source license.
The most starred is Dcmini by dcmini-org.
Parts used alongside the MDBT50Q-1MV2
Microcontrollers on boards using the MDBT50Q-1MV2
What boards using the MDBT50Q-1MV2 are built for
MDBT50Q-1MV2: common questions
Where can I find a MDBT50Q-1MV2 reference design?
Each of the 50 boards on this page is a real design using the MDBT50Q-1MV2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MDBT50Q-1MV2 VDD pin?
The VDD pin has a decoupling capacitor on 20 of 27 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 28 open source designs using the MDBT50Q-1MV2.
How is the MDBT50Q-1MV2 P0.09 pin connected?
The P0.09 pin is left unconnected on 24 of 27 designs (a signal on 3). Counted from the KiCad layouts of 28 open source designs using the MDBT50Q-1MV2.
How is the MDBT50Q-1MV2 P0.10 pin connected?
The P0.10 pin is left unconnected on 24 of 27 designs (a signal on 3). Counted from the KiCad layouts of 28 open source designs using the MDBT50Q-1MV2.
What parts are used alongside the MDBT50Q-1MV2?
The USBLC6-2SC6, MCP73831T-2ACI/OT, MCP73831-2-OT, AP2112K-3.3 and AP2112K-3.3TRG1 appear in the most repositories here.
Which microcontrollers do boards using the MDBT50Q-1MV2 use?
Most are built on Nordic nRF (48), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the MDBT50Q-1MV2?
The median is 76 × 70.5 mm, and 49% are two-layer designs.
What is the most popular open source board using the MDBT50Q-1MV2?
By GitHub stars, Dcmini by dcmini-org, with 7 stars.
Can I simulate one of these boards using the MDBT50Q-1MV2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.