GPS-tracker
Dhruv2212-star·GPS-tracker·PCB/GPS traacker.kicad_pcb
About the GPS-tracker PCB
GPS-tracker is an open source PCB design by Dhruv2212-star, published on GitHub. It is a 2-layer board measuring 55 × 42 mm, with 33 components from 18 distinct parts.
Other key parts include the TP4056-42-ESOP8, AP2112K-3.3, MOUDLE-SEEEDUINO-XIAO and MAX-M10S. By type, the board carries 9 capacitors, 8 resistors, 6 diodes, 4 ICs, 4 connectors and 1 fuse.
It belongs with the rf & radio and power & battery designs in this gallery.
From the project
Ai ussage- debugging firmware Project description- a small pocket sized instrument that uses GPS module paired with Xiao RP2040 module as the MCU to track your coordinates every min that you can put on websites like google maps or GPS visualizer, it uses a small Li-Po battery to
Ai ussage- debugging firmware Project description- a small pocket sized instrument that uses GPS module paired with Xiao RP2040 module as the MCU to track your coordinates every min that you can put on websites like google maps or GPS visualizer, it uses a small Li-Po battery to save some space and also prevent and hazard related to fires from damage. it also has a charging USB-c port to charge the battery and charging and protection based on TP4056. there are 3 LEDs that provide data on GPS logging, data logging and power. there is also a push button to provide the user control for stopping…
Main components on the GPS-tracker
GPS-tracker bill of materials (BOM)
33 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | MOUDLE-SEEEDUINO-XIAO | XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U3 |
| 1 | MAX-M10S | ublox_MAX | U4 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | Conn_Coaxial | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J3 |
| 1 | Micro_SD_Card | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J4 |
| 1 | Polyfuse | Fuse_1206_3216Metric | F1 |
| 1 | SW_Push | SW_SPST_TL3305A | SW1 |
| 1 | ESD5ZXX ESD5Zxx | D_SOD-523 | D1 |
| 5 | LED | LED_0603_1608Metric | D2, D3, D4, D5, D6 |
| 5 | 10 µF | C_0603_1608Metric | C1, C2, C3, C4, C9 |
| 3 | 100 nF | C_0603_1608Metric | C5, C6, C8 |
| 1 | 4.7 µF | C_0603_1608Metric | C7 |
| 2 | R | R_0603_1608Metric | R1, R2 |
| 1 | 2 kΩ | R_0603_1608Metric | R3 |
| 5 | 1 kΩ | R_0603_1608Metric | R4, R5, R6, R7, R8 |
GPS-tracker design files
The KiCad project lives in the Dhruv2212-star/GPS-tracker repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/GPS traacker.kicad_pcb
- SchematicPCB/GPS traacker.kicad_sch
- BOMBOM.csv
GPS-tracker: common questions
How big is the GPS-tracker PCB?
The GPS-tracker measures 55 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GPS-tracker?
33 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GPS-tracker design files?
From the Dhruv2212-star/GPS-tracker repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GPS-tracker design in my own project?
The repository has no license, so all rights stay with Dhruv2212-star. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k