Weather station
Dhruv2212-star·weather-station·PCB development files/Weather station.kicad_pcb
About the Weather station PCB
Weather station is an open source ESP32 PCB design by Dhruv2212-star, published on GitHub. It is a 2-layer board measuring 56 × 58 mm, with 22 components from 15 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the MCP73831-2-OT and AP2112K-3.3. By type, the board carries 6 capacitors, 5 connectors, 4 resistors, 3 ICs, 3 switches and 1 diode.
It belongs with the sensors and iot & wireless designs in this gallery.
From the project
A Complete working model of a small but usefull weather station made at home with custom PCB and Casings to give it a unique look!
Main components on the Weather station
Weather station bill of materials (BOM)
22 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | MODULE_ESP32-DEVKITC | U1 |
| 1 | MCP73831-2-OT | SOT-23-5 | U2 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | TPS61023 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Battery | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | BME280 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | PMS5003 | JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical | J5 |
| 3 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3 |
| 1 | STATUS LED | LED_D5.0mm | D1 |
| 2 | 4.7 µF | C_0805_2012Metric | C1, C2 |
| 4 | 10 µF | C_0805_2012Metric | C3, C4, C5, C6 |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 2 kΩ | R_0805_2012Metric | R2 |
| 2 | 5.1 kΩ | R_0805_2012Metric | R3, R4 |
Weather station design files
The KiCad project lives in the Dhruv2212-star/weather-station repository on GitHub; these links point at the commit this page was built from.
Weather station: common questions
What microcontroller does the Weather station use?
The Weather station is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Weather station PCB?
The Weather station measures 56 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Weather station?
22 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Weather station design files?
From the Dhruv2212-star/weather-station repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Weather station design in my own project?
The repository has no license, so all rights stay with Dhruv2212-star. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Weather station without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k