USBNightLightV1
About the USBNightLightV1 PCB
USBNightLightV1 is an open source ESP8266 PCB design by dipenarathod, published on GitHub. It is a 2-layer board measuring 52.2 × 35.6 mm, with 25 components from 13 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the SN74AHCT125N and AMS1117-3.3. By type, the board carries 9 diodes, 6 connectors, 5 resistors, 3 ICs and 2 capacitors.
From the project
DIY smart lights. Right now focusing on ESP12 and WLED.
Main components on the USBNightLightV1
USBNightLightV1 bill of materials (BOM)
25 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74AHCT125N | DIP794W53P254L1930H508Q14N | IC1 |
| 1 | ESP-12E | ESP-12E | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | USB1061-XX-X-X_REVA | GCT_USB1061-XX-X-X_REVA | J1 |
| 1 | IO1 | PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | IO3 | PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | IO2 | PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | DataI/P | PinHeader_1x01_P2.54mm_Vertical | J6 |
| 9 | SK6812 | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 1 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | locked | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 5 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5 |
USBNightLightV1 design files
The KiCad project lives in the dipenarathod/Smart-Lights repository on GitHub; these links point at the commit this page was built from.
USBNightLightV1: common questions
What microcontroller does the USBNightLightV1 use?
The USBNightLightV1 is built around the ESP-12E, from the ESP8266 family.
How big is the USBNightLightV1 PCB?
The USBNightLightV1 measures 52.2 × 35.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USBNightLightV1?
25 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the USBNightLightV1 design files?
From the dipenarathod/Smart-Lights repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the USBNightLightV1 design in my own project?
The repository has no license, so all rights stay with dipenarathod. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the USBNightLightV1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in Smart-Lights
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398