RHS Joystick
About the RHS Joystick PCB
RHS Joystick is an open source PCB design by dmcke5, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 2 × 2 mm, with 3 components from 3 distinct parts.
Other key parts include the COM-09032 and DRV5053OAQDBZR. By type, the board carries 2 ICs and 1 connector.
It belongs with the power & battery designs in this gallery.
From the project
This is the second revision of my Mini PC based handheld Gaming PC! It is designed for a Beelink SER 5 Mini PC but could be adapted to other systems by changing the mounting brackets and outlet plate.
This is the second revision of my Mini PC based handheld Gaming PC! It is designed for a Beelink SER 5 Mini PC but could be adapted to other systems by changing the mounting brackets and outlet plate.
All of the required PCB's are in the PCB Files folder as both a zipped Gerber file for direct upload to your manufacturer of choice, along with the KiCad project files which you can use to check locations/orientations of components and produce a BOM.
Main components on the RHS Joystick
RHS Joystick bill of materials (BOM)
3 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | COM-09032 | PS5 Joystick | U1 |
| 1 | DRV5053OAQDBZR | DBZ0003A_N | U2 |
| 1 | 5051100692 | CON_5051100692_MOL | J1 |
RHS Joystick design files
The KiCad project lives in the dmcke5/ZenDeck repository on GitHub; these links point at the commit this page was built from.
RHS Joystick: common questions
How big is the RHS Joystick PCB?
The RHS Joystick measures 2 × 2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RHS Joystick?
3 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the RHS Joystick design files?
From the dmcke5/ZenDeck repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RHS Joystick design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which dmcke5 chose for the repository.
More boards in ZenDeck
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k