JoeHocker
DominikNeugebauer·PCB·JoeHocker/JoeHocker/JoeHocker.kicad_pcb
About the JoeHocker PCB
JoeHocker is an open source ESP32 PCB design by DominikNeugebauer, published on GitHub. It is a 4-layer board measuring 81.4 × 47.7 mm, with 43 components from 20 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R2, from the ESP32 family. Other key parts include the DFR0299. By type, the board carries 16 resistors, 11 capacitors, 6 diodes, 3 switches and 1 IC.
From the project
All of my pcb projects i have made so far
Main components on the JoeHocker
JoeHocker bill of materials (BOM)
43 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DFR0299 | MODULE_DFR029_DFPLAYER | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | AMS1117 |
| 2 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | SPI1, SPI2 |
| 3 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | SW1, SW2, SW3 |
| 1 | SPEAKER | PinHeader_1x02_P2.54mm_Vertical | SpeakerConn1 |
| 1 | ESP32-S3-WROOM-1-N16R2 | ESP32_S3_WROOM_N16R2_CUSTOM | UESP32-S3-WROOM1 |
| 1 | TYPE-C-31-M-12 | HRO_TYPE-C-31-M-12 | USB-C1 |
| 1 | 1N5819HW-7-F | SOD3715X145N | D1 |
| 3 | LESD5D5.0CT1G | TVS_LESD5D5.0CT1G | D2, D3, D4 |
| 1 | PWR | LED_1206_3216Metric | D5 |
| 1 | LED | LED_1206_3216Metric | D7 |
| 4 | 10uF | C_0603_1608Metric | C1, C2, C4, C13 |
| 2 | 0u1F | C_0603_1608Metric | C3, C5 |
| 4 | 0.1uF | C_0603_1608Metric | C6, C10, C11, C14 |
| 1 | 1uF | C_0603_1608Metric | C12 |
| 2 | 5k1 | R_0603_1608Metric | R1, R2 |
| 2 | 75 | R_0603_1608Metric | R3, R11 |
| 3 | 10k | R_0603_1608Metric | R4, R5, R7 |
| 3 | 100 | R_0603_1608Metric | R6, R8, R9 |
| 6 | 33 | R_0603_1608Metric | R10, R12, R13, R14, R15, R16 |
JoeHocker design files
The KiCad project lives in the DominikNeugebauer/PCB repository on GitHub; these links point at the commit this page was built from.
JoeHocker: common questions
What microcontroller does the JoeHocker use?
The JoeHocker is built around the ESP32-S3-WROOM-1-N16R2, from the ESP32 family.
How big is the JoeHocker PCB?
The JoeHocker measures 81.4 × 47.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the JoeHocker?
43 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the JoeHocker design files?
From the DominikNeugebauer/PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the JoeHocker design in my own project?
The repository has no license, so all rights stay with DominikNeugebauer. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the JoeHocker without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in PCB
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k