Helios cad forge

draarivpatel-ui·helios-cad-forge·pcb/helios_mppt_node.kicad_pcb

Helios cad forge PCB layout, top view — open source RP2040/RP2350 board by draarivpatel-ui

About the Helios cad forge PCB

Helios cad forge is an open source RP2040/RP2350 PCB design by draarivpatel-ui, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 56 mm, with 48 components from 22 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q16JVSSIQ, INA219AIDR and AP2112K-3.3TRG1. By type, the board carries 18 capacitors, 14 resistors, 8 connectors, 4 ICs, 2 switches and 1 crystal.

It belongs with the power & battery designs in this gallery.

From the project

Live CAD & EDA Workbench: https://aariv.me/helios-cad-forge/

Live CAD & EDA Workbench: https://aariv.me/helios-cad-forge/

How this was made. The CAD, the KiCad files, the BOM, the code, the tests and this text were generated by an AI assistant (Claude) at the owner's request. Hack Club Forge asks for an "original, custom design by you. Not by AI" and warns that "fully AI-generated design files" may be rejected and lead to a ban, and Atlantis counts CAD hours from timelapses of the person doing the work. So this is a disclosed AI-generated reference design, not an eligible Forge or Atlantis entry, and nothing here has been printed, assembled or…

Main components on the Helios cad forge

Helios cad forge bill of materials (BOM)

48 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
Raspberry Pi
U1
1
W25Q16JVSSIQ
Winbond
U2
1
INA219AIDR
Texas Instruments
U3
1
AP2112K-3.3TRG1
AP2112K-3.3
Diodes Incorporated
U4
1
X322512MSB4SI
12MHz
YXC
Y1
1
TYPE-C-31-M-12
USB-C
Korean Hroparts Elec
J1
2
B-2100S05P-A110
1x05 header
Ckmtw
J2, J3
1
B-2100S06P-A110
1x06 header
Ckmtw
J4
2
B-2100S02P-A110
1x02 header
Ckmtw
J5, J6
2
B-2100S03P-A110
1x03 header
Ckmtw
J7, J8
1
TS-1187A-B-A-B
BOOTSEL
XKB Connection
SW1
1
TS-1187A-B-A-B
RESET
XKB Connection
SW2
1
NCD0805R1
RED
Nationstar
D1
2
CL10A106KP8NNNC
10uF
Samsung Electro-Mechanics
C1, C2
12
CL10B104KB8NNNC
100nF
Samsung Electro-Mechanics
C3, C4, C5, C6, C7, C8, C9, C10 +4
2
CL10A105KB8NNNC
1uF
Samsung Electro-Mechanics
C13, C14
2
CL10C220JB8NNNC
22pF
Samsung Electro-Mechanics
C15, C16
2
0603WAF270JT5E
27R
UNI-ROYAL
R1, R2
3
0603WAF1001T5E
1k
UNI-ROYAL
R3, R6, R13
6
0603WAF1002T5E
10k
UNI-ROYAL
R4, R5, R9, R10, R11, R12
Show 2 more
QtyPartRefs
2
0603WAF5101T5E
5.1k
UNI-ROYAL
R7, R8
1
1206W4F100LT5E
0R1
UNI-ROYAL
R14

Helios cad forge design files

The KiCad project lives in the draarivpatel-ui/helios-cad-forge repository on GitHub; these links point at the commit this page was built from.

Helios cad forge: common questions

What microcontroller does the Helios cad forge use?

The Helios cad forge is built around the RP2040, from the RP2040/RP2350 family.

How big is the Helios cad forge PCB?

The Helios cad forge measures 80 × 56 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Helios cad forge?

48 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Helios cad forge design files?

From the draarivpatel-ui/helios-cad-forge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Helios cad forge design in my own project?

Yes, under the terms of its MIT license, which draarivpatel-ui chose for the repository.

Can I test firmware for the Helios cad forge without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards