PCB A
About the PCB A
PCB A is an open source PCB design by dragondgold, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 54 × 54 mm, with 69 components from 45 distinct parts.
Other key parts include the A2235-H, CC1101RGP, 0915BM15A0001E, AP9211SA-AF-HAC-7 and B39921B3588U410. By type, the board carries 23 capacitors, 16 resistors, 8 inductors, 6 ICs, 5 connectors and 3 modules.
From the project
Plataforma educativa basada en un satélite CanSat
El objetivo principal del proyecto es el de proveer un satélite tipo CanSat completamente funcional y listo para ser utilizado, con una Estación Terrena para la comunicación con el mismo, a modo de plataforma educativa que permite no solo ser utilizada por estudiantes sin modificación alguna, sino que provee la capacidad de ser expandida para agregar o mejorar las funcionalidades básicas dando lugar a los estudiantes a experimentar libremente sobre una plataforma segura.
Main components on the PCB A
PCB A bill of materials (BOM)
69 components, 45 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A2235-H | A2235-H | U1 |
| 1 | CC1101RGP | QFN50P400X400X100-21N-D | U2 |
| 1 | 0915BM15A0001E | 0915BM15A0001E | U3 |
| 1 | AP9211SA-AF-HAC-7 | AP9211SAACHAC7 | U4 |
| 1 | B39921B3588U410 | B39921B3588U410 | U5 |
| 1 | CC1190 | Texas_S-PVQFN-N16_EP2.7x2.7mm | U6 |
| 3 | Spacer | Empty_Footprint | M1, M2, M3 |
| 1 | SSM3J338R,LF | SSM3J332RLFT | Q1 |
| 1 | BC817 | SOT-23 | Q2 |
| 1 | 26 MHz | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | Batería LiPo (Soldada) | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | CONUFL001-SMD | CONUFL001-SMD | J2 |
| 1 | Servo Globo | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conector_PCB_A-B | Conector_PCB_A-B | J4 |
| 1 | Servo Paracaídas | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | MH_CanSat | MH_CanSat | MH1 |
| 1 | 500SSP1S1M6QEA | 500SSP1S1M6QEA | S1 |
| 1 | Rojo | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 2 | Verde | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3 |
| 1 | Bead | L_0402_1005Metric | L1 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10nH | L_0402_1005Metric | L2, L3 |
| 1 | 1.5nH | L_0402_1005Metric | L4 |
| 1 | 22nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L5 |
| 1 | 7.5nH | L_0402_1005Metric | L6 |
| 1 | 2.9nH | L_0402_1005Metric | L7 |
| 1 | 9.1nH | L_0402_1005Metric | L8 |
| 9 | 100nF | C_0402_1005Metric | C1, C2, C4, C5, C6, C9, C10, C11 +1 |
| 1 | 1uF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 4 | 15pF | C_0402_1005Metric | C7, C8, C16, C17 |
| 1 | 0.8pF | C_0402_1005Metric | C13 |
| 1 | 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C14 |
| 1 | 100pF | C_0402_1005Metric | C15 |
| 1 | 47pF | C_0402_1005Metric | C18 |
| 2 | 12pF | C_0402_1005Metric | C19, C20 |
| 1 | 3.3pF | C_0402_1005Metric | C21 |
| 1 | 7.5pF | C_0402_1005Metric | C22 |
| 1 | n.a | C_0402_1005Metric | C23 |
| 4 | 1k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R11, R12 |
| 6 | 10K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4, R5, R6, R7, R16 |
| 1 | 56k | R_0402_1005Metric | R8 |
| 1 | 3.3k | R_0402_1005Metric | R9 |
| 1 | 10R | R_0402_1005Metric | R10 |
| 1 | 2.7k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13 |
| 1 | 330 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14 |
| 1 | 47R | R_0402_1005Metric | R15 |
PCB A design files
The KiCad project lives in the dragondgold/CanSat repository on GitHub; these links point at the commit this page was built from.
PCB A: common questions
How big is the PCB A?
The PCB A measures 54 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB A?
69 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PCB A design files?
From the dragondgold/CanSat repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the PCB A design in my own project?
Yes, under the terms of its GPL-3.0 license, which dragondgold chose for the repository.
