8 open source boards using the 0915BM15A0001E
Real designs built with the 0915BM15A0001E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Flipper subg
ElectronicCats
67 × 31.3 mm41 parts4LNo license130FaradayRF-Hardware
FaradayRF
74.9 × 53.3 mm139 parts4LTAPR-OHL-1.043CubeSat-Radio
SFUSatClub
95.9 × 90.2 mm280 parts4LNo license9ESP32
Marauder
ElectronicCats
67 × 28 mm31 parts2LNo license130PCB A
dragondgold
54 × 54 mm46 parts2LGPL-3.05PCB A
dragondgold
54 × 54 mm69 parts2LGPL-3.01PIC
EstacionTerrena
dragondgold
40 × 30 mm54 parts2LGPL-3.01EstacionTerrena
dragondgold
40 × 30 mm35 parts2LGPL-3.05
How designs wire the 0915BM15A0001E
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 0915BM15A0001E connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin has a series capacitor on 3 of 5 designs, most often 100 pF (then 39 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: Signal 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| GND_2pin 5 | Connected to: GND 100% | — |
| GND_3pin 6 | Connected to: GND 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Flipper subg by ElectronicCats, FaradayRF-Hardware by FaradayRF, CubeSat-Radio by SFUSatClub and EstacionTerrena by dragondgold.
The 0915BM15A0001E in open source designs
The gallery holds 8 open source boards using the 0915BM15A0001E from 5 GitHub repositories; a typical one measures about 60.5 × 42.3 mm and carries around 50 components.
63% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Flipper subg by ElectronicCats.
Parts used alongside the 0915BM15A0001E
What boards using the 0915BM15A0001E are built for
0915BM15A0001E: common questions
Where can I find a 0915BM15A0001E reference design?
Each of the 8 boards on this page is a real design using the 0915BM15A0001E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 0915BM15A0001E OUT pin connected?
The OUT pin has a series capacitor on 3 of 5 designs, most often 100 pF (then 39 pF). Counted from the KiCad layouts of 5 open source designs using the 0915BM15A0001E.
What parts are used alongside the 0915BM15A0001E?
The A2235-H, CC1101RGP, CC1190RGVR and TPD2E2U06DRLR appear in the most repositories here.
Which microcontrollers do boards using the 0915BM15A0001E use?
Most are built on ESP32 (1) and PIC (1).
How big is a typical board using the 0915BM15A0001E?
The median is 60.5 × 42.3 mm, and 63% are two-layer designs.
What is the most popular open source board using the 0915BM15A0001E?
By GitHub stars, Flipper subg by ElectronicCats, with 130 stars.
Can I simulate one of these boards using the 0915BM15A0001E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.