11 open source boards using the CC1190RGVR
Real designs built with the CC1190RGVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FaradayRF-Hardware
FaradayRF
74.9 × 53.3 mm139 parts4LTAPR-OHL-1.043
Main rev b final
iamdarshg
130 × 74.5 mm167 parts4LNo license2
STM32OpenLST
MatthiasGeorgImhof
80 × 80 mm171 parts4LCC-BY-NC-4.00
Main rev b final.before diff pair ripup
130 × 74.5 mm167 parts4LNo license2
Main rev b
140 × 100 mm161 parts4LNo license2
Main rev b completed
140 × 100 mm161 parts4LNo license2
Main rev b routed
140 × 100 mm161 parts4LNo license2
Main rev b routed clean
140 × 100 mm161 parts4LNo license2
Main rev b routed iter2 filled
140 × 100 mm161 parts4LNo license2
Main rev b shortfix
140 × 100 mm161 parts4LNo license2
Raspberry PiMain
75.5 × 50.5 mm112 parts4LNo license2
The CC1190RGVR in open source designs
The gallery holds 11 open source boards using the CC1190RGVR from 3 GitHub repositories; a typical one measures about 140 × 100 mm and carries around 161 components.
100% use four copper layers or more, and 9% carry an open source license.
The most starred is FaradayRF-Hardware by FaradayRF.
Microcontrollers on boards using the CC1190RGVR
What boards using the CC1190RGVR are built for
CC1190RGVR: common questions
Where can I find a CC1190RGVR reference design?
Each of the 11 boards on this page is a real design using the CC1190RGVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the CC1190RGVR use?
Most are built on Raspberry Pi (1) and STM32 (1).
How big is a typical board using the CC1190RGVR?
The median is 140 × 100 mm, and 0% are two-layer designs.
What is the most popular open source board using the CC1190RGVR?
By GitHub stars, FaradayRF-Hardware by FaradayRF, with 43 stars.
Can I simulate one of these boards using the CC1190RGVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.