5 open source boards using the A2235-H

Real designs built with the A2235-H, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the A2235-H

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the A2235-H connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 2 is left unconnected on 5 of 5 designs.
  • Pin 3 is tied to 3.3V on 5 of 5 designs.
  • Pin 4 is left unconnected on 5 of 5 designs.
  • Pin 6 is tied to GND on 5 of 5 designs.
Pin 1Connected to: Signal 100%
  • Pull-up to 3.3V on 60% · 10 kΩ (2)
Pin 2Connected to: Not connected 100%
Pin 3Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 100 nF (3), 1 µF (2)
Pin 4Connected to: Not connected 100%
Pin 5Connected to: Signal 80% · 1.8V 20%
  • Series resistor on 80% · 10 kΩ (5)
Pin 6Connected to: GND 100%
Pin 7Connected to: Signal 100%
  • Series resistor on 80% · 10 kΩ (3)
Pin 8Connected to: Not connected 80% · a signal 20%
Pin 9Connected to: GND 100%
Pin 10Connected to: Not connected 60% · a signal 40%
Pin 11Connected to: Not connected 60% · 3.3V 40%
Pin 12Connected to: Not connected 60% · a signal 40%
Pin 13Connected to: Not connected 100%
Pin 14Connected to: Not connected 100%
Pin 15Connected to: Not connected 100%
Pin 16Connected to: Not connected 100%
Pin 17Connected to: Signal 80% · not connected 20%
  • Resistor to GND on 60% · 10 kΩ (2), 2.2 kΩ (1)
Pin 18Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 10 kΩ (2), 2 kΩ (1)
  • Pull-up to 1.8V on 40% · 2.2 kΩ (1)
Pin 19Connected to: Not connected 80% · a signal 20%
Pin 20Connected to: Signal 60% · not connected 20% · GND 20%
  • Resistor to GND on 60% · 10 kΩ (2)
Pin 23Connected to: GND 100%
Pin 24Connected to: GND 100%
Pin 25Connected to: GND 100%
Pin 26Connected to: GND 100%
Pin 27Connected to: GND 100%
Pin 28Connected to: GND 100%
Pin 29Connected to: GND 100%
Pin 30Connected to: GND 100%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenBeacon3 by etherkit, PCB A by dragondgold, CPU Board by jsjolund and PCB A by dragondgold.

The A2235-H in open source designs

The gallery holds 5 open source boards using the A2235-H from 5 GitHub repositories; a typical one measures about 100 × 70 mm and carries around 97 components.

100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is OpenBeacon3 by etherkit.

Parts used alongside the A2235-H

Microcontrollers on boards using the A2235-H

What boards using the A2235-H are built for

A2235-H: common questions

Where can I find a A2235-H reference design?

Each of the 5 boards on this page is a real design using the A2235-H. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the A2235-H pin 2 connected?

Pin 2 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the A2235-H.

How is the A2235-H pin 3 connected?

Pin 3 is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the A2235-H.

How is the A2235-H pin 4 connected?

Pin 4 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the A2235-H.

Which microcontrollers do boards using the A2235-H use?

Most are built on ESP32 (1), Microchip SAM (1) and STM32 (1).

How big is a typical board using the A2235-H?

The median is 100 × 70 mm, and 100% are two-layer designs.

What is the most popular open source board using the A2235-H?

By GitHub stars, OpenBeacon3 by etherkit, with 7 stars.

Can I simulate one of these boards using the A2235-H before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part