9 open source boards using the CC1101RGP
Real designs built with the CC1101RGP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Oniondao badge
OnionDAO-git
76.6 × 141.1 mm116 parts2LNo license17ESP32
CoralWave
mineiwik
54.1 × 21.9 mm45 parts2LMIT5ESP32
ZEGAR-ESP32
Fese673
54.1 × 21.9 mm45 parts2LNo license1ESP32
Mk oniondao badge
majeedkhori
76.6 × 141.1 mm116 parts2LNo license0CubeSat-Communications-Board-Fall-2025-V2
jonnylin22
93.9 × 97.3 mm62 parts4LNo license0PCB A
dragondgold
54 × 54 mm46 parts2LGPL-3.05PCB A
dragondgold
54 × 54 mm69 parts2LGPL-3.01PIC
EstacionTerrena
dragondgold
40 × 30 mm54 parts2LGPL-3.01EstacionTerrena
dragondgold
40 × 30 mm35 parts2LGPL-3.05
How designs wire the CC1101RGP
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the CC1101RGP connects to, and the resistors, capacitors and other passives placed on it.
- The DVDD pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 220 pF).
- The DCOUPL pin has a capacitor to GND on 7 of 7 designs, most often 100 nF (then 220 pF).
- The XOSC_Q1 pin has a crystal on 7 of 7 designs, most often 26 MHz.
- The XOSC_Q1 pin has a capacitor to GND on 7 of 7 designs, most often 27 pF (then 15 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DVDDpin 4 | Connected to: 3.3V 100% |
|
| DCOUPLpin 5 | Connected to: Signal 86% |
|
| XOSC_Q1pin 8 | Connected to: Signal 100% |
|
| AVDDpin 9, 11, 14, 15 | Connected to: 3.3V 100% |
|
| XOSC_Q2pin 10 | Connected to: Signal 100% |
|
| RF_Ppin 12 | Connected to: 0915BM15A0001E 29% |
|
| RF_Npin 13 | Connected to: 0915BM15A0001E 29% |
|
| GNDpin 16, 19 | Connected to: GND 100% | — |
| RBIASpin 17 | Connected to: Signal 100% |
|
| DGUARDpin 18 | Connected to: 3.3V 100% | — |
| EPADpin 21 | Connected to: GND 100% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Oniondao badge by OnionDAO-git, EstacionTerrena by dragondgold, CoralWave by mineiwik and EstacionTerrena by dragondgold.
The CC1101RGP in open source designs
The gallery holds 9 open source boards using the CC1101RGP from 7 GitHub repositories; a typical one measures about 54 × 54 mm and carries around 54 components.
89% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is Oniondao badge by OnionDAO-git.
Parts used alongside the CC1101RGP
What boards using the CC1101RGP are built for
CC1101RGP: common questions
Where can I find a CC1101RGP reference design?
Each of the 9 boards on this page is a real design using the CC1101RGP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the CC1101RGP DVDD pin?
The DVDD pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 220 pF). Counted from the KiCad layouts of 7 open source designs using the CC1101RGP.
How is the CC1101RGP DCOUPL pin connected?
The DCOUPL pin has a capacitor to GND on 7 of 7 designs, most often 100 nF (then 220 pF). Counted from the KiCad layouts of 7 open source designs using the CC1101RGP.
How is the CC1101RGP XOSC_Q1 pin connected?
The XOSC_Q1 pin has a crystal on 7 of 7 designs, most often 26 MHz. Counted from the KiCad layouts of 7 open source designs using the CC1101RGP.
What parts are used alongside the CC1101RGP?
The 0915BM15A0001E, A2235-H, ATECC608B-SSHDA, CH340C and ESP32-C3-WROOM-02-N4 appear in the most repositories here.
Which microcontrollers do boards using the CC1101RGP use?
Most are built on ESP32 (4) and PIC (1).
How big is a typical board using the CC1101RGP?
The median is 54 × 54 mm, and 89% are two-layer designs.
What is the most popular open source board using the CC1101RGP?
By GitHub stars, Oniondao badge by OnionDAO-git, with 17 stars.
Can I simulate one of these boards using the CC1101RGP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.