Inferno esp32-usb
DrEVILish·inferno-esp32-usb·hardware/kicad/usb-inferno.kicad_pcb
About the Inferno esp32-usb PCB
Inferno esp32-usb is an open source ESP32 PCB design by DrEVILish, published on GitHub. It is a 4-layer board measuring 60 × 40 mm, with 118 components from 39 distinct parts.
Its main chip is the ESP32-P4NRW32X, from the ESP32 family. Other key parts include the TPS25200DRVR, TLV62569DBVR, W25Q128JVSIQ and IP101GRI. By type, the board carries 55 capacitors, 47 resistors, 6 ICs, 3 crystals, 3 diodes and 2 connectors.
It belongs with the audio designs in this gallery.
From the project
Audio over IP to USB interface.
This folder holds the custom board: USB-C (UAC2 HS, bus powered) and RJ45 (10/100 RMII) on an ESP32-P4NRW32X. The design rationale, the sources of every value, the pin table, the power budget and the risk list are in docs/40-board-rev1.md.
tools/makepcb.py overwrites usb-inferno.kicadpcb. Once the human layout pass starts, stop running it. Push schematic changes into the routed board with pcbnew File → Import Netlist (kicad/usb-inferno.net, match by reference).
Main components on the Inferno esp32-usb
Inferno esp32-usb bill of materials (BOM)
118 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-P4NRW32X Espressif Systems | Espressif_QFN-104-1EP_10x10mm_P0.35mm_EP7.5x7.5mm | U1 |
| 1 | TPS25200DRVR TPS25200DRV Texas Instruments | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U2 |
| 2 | TLV62569DBVR TLV62569DBV Texas Instruments | SOT-23-5 | U3, U4 |
| 1 | W25Q128JVSIQ W25Q128JVS Winbond | SOIC-8_5.3x5.3mm_P1.27mm | U5 |
| 1 | IP101GRI IC Plus | QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm_ThermalVias | U6 |
| 1 | ECS-3225MV-500-CN-TR 50MHz ECS Inc. | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | X322540MPB4SI 40MHz YXC | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | X322525MSB4SI 25MHz DNP YXC | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | TYPE-C-31-M-12 USB-C Korean Hroparts Elec | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | HR911105A RJ45 HanRun | RJ45_Hanrun_HR911105A_Horizontal | J2 |
| 1 | TPD2EUSB30DRTR TPD2EUSB30 Texas Instruments | Texas_DRT-3 | D1 |
| 1 | SMAJ5.0A Littelfuse | D_SMA | D2 |
| 1 | 19-217/GHC-YR1S2/3T green Everlight | LED_0603_1608Metric | D3 |
| 2 | FNR4020S2R2MT 2.2u cjiang (Changjiang Microelectronics) | L_Changjiang_FNR4020S | L1, L2 |
| 7 | CL05A105KA5NQNC 1u Samsung | C_0402_1005Metric | C1, C33, C35, C38, C39, C40, C46 |
| 25 | CL05B104KO5NNNC 100n Samsung | C_0402_1005Metric | C2, C13, C14, C15, C16, C17, C18, C20 +17 |
| 1 | CL10B103KC8NNNC 10n Samsung | C_0603_1608Metric | C3 |
| 8 | CL10A106KP8NNNC 10u Samsung | C_0603_1608Metric | C4, C12, C19, C21, C23, C24, C49, C53 |
| 3 | CL10A475KO8NNNC 4.7u Samsung | C_0603_1608Metric | C5, C9, C28 |
| 2 | 0402CG220J500NT 22p DNP FH | C_0402_1005Metric | C6, C43 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | CL21A226MAQNNNE 22u Samsung | C_0805_2012Metric | C7, C8, C11 |
| 3 | 0402CG220J500NT 22p FH | C_0402_1005Metric | C10, C41, C42 |
| 1 | CL05B103KB5NNNC 10n Samsung | C_0402_1005Metric | C26 |
| 2 | 0402CG200J500NT 20p DNP FH | C_0402_1005Metric | C47, C48 |
| 7 | 0402WGF5101TCE 5.1k UNI-ROYAL | R_0402_1005Metric | R1, R2, R38, R39, R40, R41, R42 |
| 1 | 0402WGF1004TCE 1M UNI-ROYAL | R_0402_1005Metric | R3 |
| 1 | 0402WGF0000TCE 0 DNP UNI-ROYAL | R_0402_1005Metric | R4 |
| 3 | 0402WGF1003TCE 100k UNI-ROYAL | R_0402_1005Metric | R5, R6, R9 |
| 1 | 0402WGF1503TCE 150k UNI-ROYAL | R_0402_1005Metric | R7 |
| 6 | 0402WGF1002TCE 10k UNI-ROYAL | R_0402_1005Metric | R8, R15, R19, R23, R24, R44 |
| 1 | 0402WGF2202TCE 22k UNI-ROYAL | R_0402_1005Metric | R10 |
| 2 | 0402WGF4993TCE 499k UNI-ROYAL | R_0402_1005Metric | R11, R12 |
| 10 | 0402WGF0000TCE 0 UNI-ROYAL | R_0402_1005Metric | R13, R14, R16, R17, R18, R20, R21, R26 +2 |
| 1 | 0402WGF1004TCE 1M DNP UNI-ROYAL | R_0402_1005Metric | R22 |
| 3 | 0402WGF1001TCE 1k UNI-ROYAL | R_0402_1005Metric | R25, R46, R47 |
| 8 | 0402WGF220JTCE 22 UNI-ROYAL | R_0402_1005Metric | R27, R28, R32, R33, R34, R35, R36, R37 |
| 1 | 0402WGF220JTCE 22 DNP UNI-ROYAL | R_0402_1005Metric | R31 |
| 1 | 0402WGF1501TCE 1.5k UNI-ROYAL | R_0402_1005Metric | R43 |
| 1 | 0402WGF6191TCE 6.19k UNI-ROYAL | R_0402_1005Metric | R45 |
Inferno esp32-usb design files
The KiCad project lives in the DrEVILish/inferno-esp32-usb repository on GitHub; these links point at the commit this page was built from.
Inferno esp32-usb: common questions
What microcontroller does the Inferno esp32-usb use?
The Inferno esp32-usb is built around the ESP32-P4NRW32X, from the ESP32 family.
How big is the Inferno esp32-usb PCB?
The Inferno esp32-usb measures 60 × 40 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Inferno esp32-usb?
118 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Inferno esp32-usb design files?
From the DrEVILish/inferno-esp32-usb repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Inferno esp32-usb design in my own project?
The repository has no license, so all rights stay with DrEVILish. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Inferno esp32-usb without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k