6 open source boards using the ESP32-P4NRW32X
Real designs built with the ESP32-P4NRW32X, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
P4eregrine
anticitizn
39.5 × 39.5 mm314 parts6LNo license15ESP32
OpenKVM
gigi74168
45 × 45 mm178 parts4LCustom license2ESP32
Pajoniiir-M1
dvucinozd
175.6 × 220.1 mm223 parts4LNo license0ESP32
Esp32-p4
Andreuxxx1977
110 × 80 mm221 parts4LCERN-OHL-P-2.00ESP32
Inferno esp32-usb
DrEVILish
60 × 40 mm118 parts4LNo license0ESP32
Daily mirror
drewhirschi
100 × 100 mm74 parts4LNo license0
How designs wire the ESP32-P4NRW32X
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESP32-P4NRW32X connects to, and the resistors, capacitors and other passives placed on it.
- The CHIP_PU_103 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
- The CHIP_PU_103 pin has a capacitor to GND on 5 of 5 designs, most often 1 µF.
- The GPIO47_89 pin is left unconnected on 5 of 5 designs.
- The GPIO48_90 pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GPIO1_1pin 1 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO3_3pin 3 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO4_4pin 4 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO5_5pin 5 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO6_6pin 6 | Connected to: Not connected 60% · a signal 40% |
|
| GPIO7_7pin 7 | Connected to: A connector 40% · not connected 20% |
|
| GPIO8_8pin 8 | Connected to: Signal 80% · not connected 20% |
|
| VDD_LP_9pin 9 | Connected to: 3.3V 100% |
|
| GPIO9_10pin 10 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO10_11pin 11 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO11_12pin 12 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO12_13pin 13 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO13_14pin 14 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO14_15pin 15 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO15_16pin 16 | Connected to: Not connected 60% · a signal 40% | — |
| VDD_IO_0_21pin 21 | Connected to: 3.3V 100% |
|
| GPIO20/ADC1_CHANNEL4_22pin 22 | Connected to: Signal 80% · not connected 20% |
|
| GPIO21/ADC1_CHANNEL5_23pin 23 | Connected to: Not connected 60% · a signal 40% |
|
| GPIO22/ADC1_CHANNEL6_24pin 24 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO23/ADC1_CHANNEL7_25pin 25 | Connected to: Not connected 60% · a signal 40% | — |
| VDD_HP_0_26pin 26 | Connected to: VDD_HP 80% · a signal 20% |
|
| FLASH_CS_27pin 27 | Connected to: Signal 100% |
|
| FLASH_Q_28pin 28 | Connected to: Signal 100% |
|
| FLASH_WP_29pin 29 | Connected to: Signal 100% |
|
| VDD_FLASH_IO_30pin 30 | Connected to: VDDO_FLASH 60% · not connected 20% · a signal 20% |
|
| FLASH_HOLD_31pin 31 | Connected to: Signal 100% |
|
| FLASH_CK_32pin 32 | Connected to: Signal 100% |
|
| FLASH_D_33pin 33 | Connected to: Signal 100% |
|
| DSI_REXT_34pin 34 | Connected to: Signal 60% · not connected 40% |
|
| DSI_DATAP1_35pin 35 | Connected to: Not connected 60% · a signal 40% |
|
| DSI_DATAN1_36pin 36 | Connected to: Not connected 60% · a signal 40% |
|
| DSI_CLKN_37pin 37 | Connected to: Not connected 60% · a signal 40% |
|
| DSI_CLKP_38pin 38 | Connected to: Not connected 60% · a signal 40% |
|
| DSI_DATAP0_39pin 39 | Connected to: Not connected 60% · a signal 40% |
|
| DSI_DATAN0_40pin 40 | Connected to: Not connected 60% · a signal 40% |
|
| VDD_MIPI_DPHY_41pin 41 | Connected to: VDDO_3 60% · not connected 20% · a signal 20% |
|
| CSI_REXT_48pin 48 | Connected to: Signal 60% · not connected 40% |
|
| USB-DM_49pin 49 | Connected to: Signal 80% · not connected 20% |
|
| USB-DP_50pin 50 | Connected to: Signal 80% · not connected 20% |
|
| VDD_USBPHY_51pin 51 | Connected to: VDD_USBPHY 80% · a signal 20% |
|
65 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include P4eregrine by anticitizn, OpenKVM by gigi74168, Esp32-p4 by Andreuxxx1977 and Inferno esp32-usb by DrEVILish.
The ESP32-P4NRW32X in open source designs
The gallery holds 6 open source boards using the ESP32-P4NRW32X from 6 GitHub repositories; a typical one measures about 80 × 62.5 mm and carries around 200 components.
100% use four copper layers or more, and 17% carry an open source license.
The most starred is P4eregrine by anticitizn.
Parts used alongside the ESP32-P4NRW32X
Microcontrollers on boards using the ESP32-P4NRW32X
What boards using the ESP32-P4NRW32X are built for
ESP32-P4NRW32X: common questions
Where can I find a ESP32-P4NRW32X reference design?
Each of the 6 boards on this page is a real design using the ESP32-P4NRW32X. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP32-P4NRW32X CHIP_PU_103 pin?
The CHIP_PU_103 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the ESP32-P4NRW32X.
How is the ESP32-P4NRW32X GPIO47_89 pin connected?
The GPIO47_89 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-P4NRW32X.
How is the ESP32-P4NRW32X GPIO48_90 pin connected?
The GPIO48_90 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-P4NRW32X.
What parts are used alongside the ESP32-P4NRW32X?
The TLV62569DBVR, IP101GRI, TPD4E05U06DQAR, TPS62132RGTR and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-P4NRW32X use?
Most are built on ESP32 (6).
How big is a typical board using the ESP32-P4NRW32X?
The median is 80 × 62.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the ESP32-P4NRW32X?
By GitHub stars, P4eregrine by anticitizn, with 15 stars.
Can I simulate one of these boards using the ESP32-P4NRW32X before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.