USB Hub
drewsum·USB_Hub·hdw/USB_Hub/USB_Hub.kicad_pcb
About the USB Hub PCB
USB Hub is an open source PCB design by drewsum, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 50 × 50 mm, with 200 components from 49 distinct parts.
Other key parts include the TPS26600RHFT, 74LVC1G97, TPS62133, TPS7A92 and TPS2121RUXR. By type, the board carries 71 resistors, 61 capacitors, 28 ICs, 21 diodes, 7 test points and 6 connectors.
It belongs with the usb & debug tools designs in this gallery.
From the project
A DIY USB hub with digital monitoring on all ports
Main components on the USB Hub
USB Hub bill of materials (BOM)
200 components, 49 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS26600RHFT | QFN-24-1EP_4x5mm_Pitch0.5mm | U201 |
| 17 | 74LVC1G97 | SOT-363_SC-70-6 | U301, U601, U602, U603, U604, U605, U701, U702 +9 |
| 1 | TPS62133 | QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm | U302 |
| 1 | TPS7A92 | Texas_S-PDSO-N10_EP1.2x2mm | U401 |
| 1 | TPS2121RUXR | 12-VQFN-HR_2x2p5 | U501 |
| 1 | TPS3808G33 | SOT-23-6 | U902 |
| 1 | M93C46-WMN6TP | SOIC-8_3.9x4.9mm_P1.27mm | U903 |
| 1 | 74LVC1G373 | SOT-363_SC-70-6 | U904 |
| 1 | TUSB2046BIRHBT | VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm | U905 |
| 1 | TPD3S044DBVR | SOT-23-6 | U1401 |
| 2 | TPS2042BDGN | MSOP-8-1EP_3x3mm_Pitch0.65mm | U1501, U1502 |
| 1 | BSS214NW | SOT-323_SC-70 | Q301 |
| 1 | ZXMS6004FFTA | SOT-23 | Q302 |
| 1 | ASE-48.000MHZ ASE-48.000MHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X901 |
| 1 | +12V IN | BARREL_JACK | J201 |
| 4 | 732-2731 USB_A | USB_A_Wuerth_614004134726_Horizontal | J1001, J1101, J1201, J1301 |
| 1 | 732-2109-1 USB_B_Mini | USB_Mini-B | J1401 |
| 1 | RESET | SW_PUSH_6mm | SW901 |
| 1 | TP | PinHeader_1x01_P2.54mm_Horizontal | TP201 |
| 6 | TP | Test_Point | TP202, TP203, TP301, TP401, TP501, TP1401 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 24V | D_SMA | D201 |
| 1 | BAT48JFILM | D_SOD-323 | D301 |
| 10 | 754-1121-1 Green | LED_0603 | D601, D602, D603, D604, D605, D701, D702, D703 +2 |
| 5 | 754-1117-1 Red | LED_0603 | D705, D706, D707, D708, D709 |
| 4 | SP0503BAHT | SOT-143 | D1001, D1101, D1201, D1301 |
| 1 | 2.2UH 2.2uH | L_Vishay_IHLP-2020 | L301 |
| 1 | MH1608-601Y 600R 0.5A | L_0603 | L901 |
| 2 | 10NF 10nF | C_0603 | C201, C304 |
| 34 | 0.1UF 0.1uF | C_0603 | C202, C301, C305, C402, C501, C502, C503, C504 +26 |
| 5 | 100UF 100uF | CP_EIA-7343-43_Kemet-X | C203, C1003, C1103, C1203, C1303 |
| 4 | 10UF 10uF | C_1206 | C302, C306, C307, C308 |
| 6 | 10UF 10uF | C_0603 | C303, C401, C403, C404, C906, C910 |
| 10 | 22PF 22pF | C_0603 | C1001, C1002, C1101, C1102, C1201, C1202, C1301, C1302 +2 |
| 1 | 51.1K 51.1k | R_0603 | R201 |
| 2 | 1.15K 1.15k | R_0603 | R202, R404 |
| 2 | 5.11K 5.11k | R_0603 | R203, R207 |
| 23 | 10K 10k | R_0603 | R204, R205, R208, R304, R305, R401, R402, R501 +15 |
| 1 | 13K 13k | R_0603 | R206 |
| 1 | 2.67K 2.67k | R_0603 | R301 |
| 3 | 10 | R_0603 | R302, R306, R901 |
| 1 | 1.37K 1.37k | R_0603 | R303 |
| 1 | 953k | R_0603 | R307 |
| 1 | 180k | R_0603 | R308 |
| 1 | 3.57K 3.57k | R_0603 | R403 |
| 4 | 4.99K 4.99k | R_0603 | R502, R504, R506, R508 |
| 2 | 18.7K 18.7k | R_0603 | R503, R510 |
| 2 | 23.7K 23.7k | R_0603 | R505, R507 |
| 16 | 1k | R_0603 | R601, R602, R603, R604, R606, R701, R702, R703 +8 |
| 10 | 27 | R_0603 | R1001, R1002, R1101, R1102, R1201, R1202, R1301, R1302 +2 |
USB Hub design files
The KiCad project lives in the drewsum/USB_Hub repository on GitHub; these links point at the commit this page was built from.
USB Hub: common questions
How big is the USB Hub PCB?
The USB Hub measures 50 × 50 mm, has 4 copper layers and is 1.5744 mm thick.
How many components are on the USB Hub?
200 components, from 49 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB Hub design files?
From the drewsum/USB_Hub repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB Hub design in my own project?
Yes, under the terms of its GPL-3.0 license, which drewsum chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389