8 open source boards using the 74LVC1G373
Real designs built with the 74LVC1G373, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Mxm immobilizer
a-little-wifi
249.4 × 111.5 mm413 parts6LNo license74Dgff immobilizer
a-little-wifi
203.7 × 69 mm159 parts6LNo license11USB Hub
drewsum
50 × 50 mm200 parts4LGPL-3.00VGA
John-Lluch
150 × 80 mm107 parts4LNo license10Cft ctl
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06Cft ctl dip
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06VGAVDG
flypie
270.5 × 147.3 mm85 parts2LGPL-3.013VGAGAL
flypie
160 × 114.3 mm75 parts2LGPL-3.013
How designs wire the 74LVC1G373
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LVC1G373 connects to, and the resistors, capacitors and other passives placed on it.
- The LE pin has a series resistor on 4 of 6 designs, most often 0 Ω (then 36 Ω).
- The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 22 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| LEpin 1 | Connected to: Signal 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| Dpin 3 | Connected to: A connector 33% |
|
| Qpin 4 | Connected to: Signal 100% |
|
| VCCpin 5 | Connected to: 3.3V 100% |
|
| OEpin 6 | Connected to: GND 50% · a signal 50% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mxm immobilizer by a-little-wifi, VGAGAL by flypie, Dgff immobilizer by a-little-wifi and VGA by John-Lluch.
The 74LVC1G373 in open source designs
The gallery holds 8 open source boards using the 74LVC1G373 from 6 GitHub repositories; a typical one measures about 155 × 112.9 mm and carries around 177 components.
75% use four copper layers or more, and 63% carry an open source license.
The most starred is Mxm immobilizer by a-little-wifi.
Parts used alongside the 74LVC1G373
What boards using the 74LVC1G373 are built for
74LVC1G373: common questions
Where can I find a 74LVC1G373 reference design?
Each of the 8 boards on this page is a real design using the 74LVC1G373. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the 74LVC1G373 LE pin?
The LE pin has a series resistor on 4 of 6 designs, most often 0 Ω (then 36 Ω). Counted from the KiCad layouts of 6 open source designs using the 74LVC1G373.
What decoupling capacitors do designs use on the 74LVC1G373 VCC pin?
The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 22 nF). Counted from the KiCad layouts of 6 open source designs using the 74LVC1G373.
What parts are used alongside the 74LVC1G373?
The 74AC161, 74LVC1G00, 74LVC1G08, 74LVC1G32 and LM2596S-5 appear in the most repositories here.
How big is a typical board using the 74LVC1G373?
The median is 155 × 112.9 mm, and 25% are two-layer designs.
What is the most popular open source board using the 74LVC1G373?
By GitHub stars, Mxm immobilizer by a-little-wifi, with 74 stars.
Can I simulate one of these boards using the 74LVC1G373 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.