Synth
driesenj·synth·meowsic-keyboard/stripboard-layouts/meowsic-opamps.net
About the Synth PCB
Synth is an open source PCB design by driesenj, published on GitHub. It is a board, with 56 components from 17 distinct parts.
Other key parts include the TL074 and TL072. By type, the board carries 30 resistors, 12 connectors, 10 capacitors, 2 ICs, 1 transistor and 1 diode.
It belongs with the audio designs in this gallery.
From the project
Arduino code for my DIY synth project
Firmware for a circuit-bent Bontempi Meowsic cat piano. The toy's 8×6 key matrix is cut away from its epoxy blob; the ESP32 owns the keybed and re-injects presses into the blob, so the original meow voice survives while the keys become a real MIDI controller.
The full firmware is designed in docs/firmware.md — feature set, what every button does now, and the work list it was built from; docs/tests.md has the acceptance run each stage has to pass on the instrument. All four stages are implemented. See Scope.
Main components on the Synth
Synth bill of materials (BOM)
56 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL074 | TL074 | U1 |
| 1 | TL072 | TL072 | U2 |
| 1 | NPN Transistor | TO-92_Inline | Q1 |
| 2 | Connector (3-pin) | PinHeader_1x03_P2.54mm_Vertical | J1 - Power, J11 - 10k LVL Pot |
| 9 | Connector (2-pin) | PinHeader_1x02_P2.54mm_Vertical | J2 - I2C, J4 - CV1 Jack, J5 - CV2 Jack, J6 - Gate 1 Jack, J7 - Gate 2 Jack, J8 - AUDIO Jack, J9 - AUX Jack, J10 - Piano Speaker +1 |
| 1 | Connector (4-pin) | PinHeader_1x04_P2.54mm_Vertical | J3 - ESP32 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 4 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C6, C7 |
| 3 | 1nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4, C5 |
| 1 | 100pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C8 |
| 2 | 10uF | CP_Radial_D5.0mm_P2.50mm | C9, C10 |
| 6 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4, R7, R11, R15, R29 |
| 5 | 20k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R5, R8, R12, R16 |
| 8 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R6, R10, R14, R23, R25, R27, R30 |
| 3 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R13, R17 |
| 6 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R18, R19, R20, R21, R22, R24 |
| 2 | 150k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R26, R28 |
Synth design files
The KiCad project lives in the driesenj/synth repository on GitHub; these links point at the commit this page was built from.
Synth: common questions
How many components are on the Synth?
56 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Synth design files?
From the driesenj/synth repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the Synth design in my own project?
The repository has no license, so all rights stay with driesenj. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687