Aq lcd grab
drinkcat·aq-lcd-grab·pcb/aq_lcd_grab.kicad_pcb
About the Aq lcd grab PCB
Aq lcd grab is an open source ESP32 PCB design by drinkcat, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 32 × 50 mm, with 30 components from 15 distinct parts.
Its main chip is the XIAO-ESP32-C6-DIP, from the ESP32 family. Other key parts include the STM32F103C8T6. By type, the board carries 12 resistors, 10 capacitors, 5 connectors, 2 ICs and 1 diode.
It belongs with the displays & leds designs in this gallery.
Main components on the Aq lcd grab
Aq lcd grab bill of materials (BOM)
30 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | Conn_01x14 | XIAO-ESP32-C6-DIP | U2 |
| 2 | FH26W-39S-0.3SHW(60) | FH26W39S03SHW60 | J1, J2 |
| 1 | Conn_01x03_Socket | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02_Socket | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | KT-0603R | LED_0603_1608Metric | D1 |
| 6 | 100n | C_0402_1005Metric | C1, C2, C3, C4, C5, C8 |
| 1 | 1u | C_0402_1005Metric | C6 |
| 1 | 4.7u | C_0402_1005Metric | C7 |
| 1 | 22u | C_0805_2012Metric | C10 |
| 1 | 100u | C_1206_3216Metric | C11 |
| 2 | 10k | R_0402_1005Metric | R1, R2 |
| 1 | 1k | R_0402_1005Metric | R3 |
| 9 | 0 | R_0402_1005Metric | R10, R11, R12, R13, R14, R15, R16, R17 +1 |
Aq lcd grab design files
The KiCad project lives in the drinkcat/aq-lcd-grab repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/aq_lcd_grab.kicad_pcb
- Schematicpcb/aq_lcd_grab.kicad_sch
Aq lcd grab: common questions
What microcontroller does the Aq lcd grab use?
The Aq lcd grab is built around the XIAO-ESP32-C6-DIP, from the ESP32 family.
How big is the Aq lcd grab PCB?
The Aq lcd grab measures 32 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Aq lcd grab?
30 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Aq lcd grab design files?
From the drinkcat/aq-lcd-grab repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Aq lcd grab design in my own project?
Yes, under the terms of its Apache-2.0 license, which drinkcat chose for the repository.
Can I test firmware for the Aq lcd grab without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k