DuckyDK-MTR-1
DuckyBoi-XD·DuckyDK-MTR-1·PCB/DuckyDK MTR-1.kicad_pcb
About the DuckyDK-MTR-1 PCB
DuckyDK-MTR-1 is an open source ESP32 PCB design by DuckyBoi-XD, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 90.7 × 70 mm, with 33 components from 12 distinct parts.
Its main chip is the XIAO-HALF-HOLE-23P, from the ESP32 family. Other key parts include the PCM5102APWR and MAX9722AEUE_. By type, the board carries 20 capacitors, 5 resistors, 3 ICs, 3 connectors and 2 switches.
From the project
This is a Metronome called the DuckyDK MTR-1
These are the files of the PCB. .pcb is the PCB editor, .sch is the schematics of the PCB, .pro is the file to see both files in the Kicad menu.
Main components on the DuckyDK-MTR-1
DuckyDK-MTR-1 bill of materials (BOM)
33 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-HALF-HOLE-23P | MOUDLE23P-SMD-2.54-21X17.8MM.kicad_mod.kicad_sym | U1 |
| 1 | PCM5102APWR | SOP65P640X120-20N | U2 |
| 1 | MAX9722AEUE_ | SOP65P640X110-16N | U3 |
| 1 | SJ1-3514N | CUI_SJ1-3514N | J1 |
| 1 | Rotenc Connection Pin | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | OLED 128x64 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 2 | SW_Push | PinHeader_1x02_P2.54mm_Vertical | SW2, SW3 |
| 14 | C | C_Disc_D5.0mm_W2.5mm_P5.00mm | C-0.1-1, C-0.1-2, C-0.1-3, C-0.1-4, C-1-1, C-1-2, C-1-3, C-1-5 +6 |
| 4 | C_Polarized_US | CP_Radial_D5.0mm_P2.00mm | C-10+-1, C-10+-2, C-10+-3, C-10+-4 |
| 2 | C | CP_Radial_D5.0mm_P2.00mm | C-100-1, C-100-2 |
| 1 | PTN092-H50115K1A | TRIM_PTN092-H50115K1A | R1 |
| 4 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R-4.7k-1, R-4.7k-2, R-470-1, R-470-2 |
DuckyDK-MTR-1 design files
The KiCad project lives in the DuckyBoi-XD/DuckyDK-MTR-1 repository on GitHub; these links point at the commit this page was built from.
DuckyDK-MTR-1: common questions
What microcontroller does the DuckyDK-MTR-1 use?
The DuckyDK-MTR-1 is built around the XIAO-HALF-HOLE-23P, from the ESP32 family.
How big is the DuckyDK-MTR-1 PCB?
The DuckyDK-MTR-1 measures 90.7 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DuckyDK-MTR-1?
33 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DuckyDK-MTR-1 design files?
From the DuckyBoi-XD/DuckyDK-MTR-1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DuckyDK-MTR-1 design in my own project?
Yes, under the terms of its GPL-3.0 license, which DuckyBoi-XD chose for the repository.
Can I test firmware for the DuckyDK-MTR-1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k