9 open source boards using the XIAO-HALF-HOLE-23P
Real designs built with the XIAO-HALF-HOLE-23P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
LINE Main
MUNAKATA-EPC
119.4 × 119.4 mm137 parts2LNo license1ESP32
Mechanizer
chinh4
151.2 × 125.4 mm132 parts2LNo license1ESP32
XIAO ESP32S3 Plus V1.0 241025
OpenKNX
17.8 × 21.1 mm70 parts6LNo license1ESP32
XIAO ESP32S3 Plus V1.1 250724
lachlanchen
17.8 × 21.1 mm70 parts6LNo license0ESP32
Cablecat
samchin
17.8 × 21.1 mm63 parts6LCERN-OHL-W-2.00ESP32
DuckyDK-MTR-1
DuckyBoi-XD
90.7 × 70 mm33 parts2LGPL-3.00ESP32
SPM-ESPSM-V1
caketetu
26.4 × 36.9 mm29 parts2LNo license0ESP32
XIAO ESP32S3 Plus V1.1 250724
yuxiangcheng2002
17.8 × 21.1 mm70 parts6LNo license0ESP32
XIAO ESP32S3 Plus V1.1 250724
Josephrp
17.8 × 21.1 mm70 parts6LCustom license12
How designs wire the XIAO-HALF-HOLE-23P
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the XIAO-HALF-HOLE-23P connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_3V3 pin has a decoupling capacitor on 5 of 9 designs, most often 100 nF.
- The U0TXD_D6/TX pin has a series resistor on 4 of 9 designs, most often 499 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| U0TXD_D6/TXpin 7 | Connected to: A connector 22% · not connected 22% |
|
| VCC_3V3pin 12 | Connected to: 3.3V 89% |
|
| GNDpin 13 | Connected to: GND 100% | — |
| VBUSpin 14 | Connected to: VBUS 89% | — |
19 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include XIAO ESP32S3 Plus V1.1 250724 by Josephrp, Mechanizer by chinh4, LINE Main by MUNAKATA-EPC and XIAO ESP32S3 Plus V1.0 241025 by OpenKNX.
The XIAO-HALF-HOLE-23P in open source designs
The gallery holds 9 open source boards using the XIAO-HALF-HOLE-23P from 9 GitHub repositories; a typical one measures about 17.8 × 21.1 mm and carries around 70 components.
56% use four copper layers or more, and 22% carry an open source license.
The most starred is XIAO ESP32S3 Plus V1.1 250724 by Josephrp.
Parts used alongside the XIAO-HALF-HOLE-23P
Microcontrollers on boards using the XIAO-HALF-HOLE-23P
What boards using the XIAO-HALF-HOLE-23P are built for
XIAO-HALF-HOLE-23P: common questions
Where can I find a XIAO-HALF-HOLE-23P reference design?
Each of the 9 boards on this page is a real design using the XIAO-HALF-HOLE-23P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the XIAO-HALF-HOLE-23P VCC_3V3 pin?
The VCC_3V3 pin has a decoupling capacitor on 5 of 9 designs, most often 100 nF. Counted from the KiCad layouts of 9 open source designs using the XIAO-HALF-HOLE-23P.
What resistor goes on the XIAO-HALF-HOLE-23P U0TXD_D6/TX pin?
The U0TXD_D6/TX pin has a series resistor on 4 of 9 designs, most often 499 Ω. Counted from the KiCad layouts of 9 open source designs using the XIAO-HALF-HOLE-23P.
What parts are used alongside the XIAO-HALF-HOLE-23P?
The SGM40567-4.2XG/TR, SGM6029CYG/TR, MCU-ESP32-S3 and PY25Q128HA-DFH-IR appear in the most repositories here.
Which microcontrollers do boards using the XIAO-HALF-HOLE-23P use?
Most are built on ESP32 (8).
How big is a typical board using the XIAO-HALF-HOLE-23P?
The median is 17.8 × 21.1 mm, and 44% are two-layer designs.
What is the most popular open source board using the XIAO-HALF-HOLE-23P?
By GitHub stars, XIAO ESP32S3 Plus V1.1 250724 by Josephrp, with 12 stars.
Can I simulate one of these boards using the XIAO-HALF-HOLE-23P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.