DuetEthernet

Duet3D·Duet-2-Hardware·Duet2/EthernetModule/DuetEthernet.kicad_pcb

DuetEthernet PCB layout, top view — open source NXP board by Duet3D

About the DuetEthernet PCB

DuetEthernet is an open source NXP PCB design by Duet3D, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 37.5 × 33.8 mm, with 36 components from 21 distinct parts.

Its main chip is the LPC1768, from the NXP family. By type, the board carries 15 resistors, 14 capacitors, 3 connectors, 2 inductors, 1 IC and 1 crystal.

From the project

The KiCAD source for the Duet 3d printer controller see www.duet3d.com

The Duet 2 3D Printer Controller design files repository.

For hardware ourhcases see https://www.duet3d.com/

Duet Hardware runs RepRapFirmware: https://github.com/Duet3D/RepRapFirmware

Documentation: https://docs.duet3d.com/Duet3Dhardware/Duet2_family

Design by Tony Lock and David Crocker More info: https://www.duet3d.com/ LICENSE: see the LICENSE file in the repository

Main components on the DuetEthernet

DuetEthernet bill of materials (BOM)

36 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LPC1768
W5500
U1
1
25MHZ
CRYSTAL_4PIN
X1
1
CONN2X20
RJ45+MAG
J1
1
CONN2X13
CONN_ALT_HEADER
J2
1
I2C_2
C_GND
J3
2
L_MINI
L1, L2
3
0u1
C1, C2, C3
2
10uF/16V
C4, C5
2
6n8
C6, C7
1
22n
C8
2
10n
C9, C11
1
4u7
C10
1
0u01 +200V
C12
2
18p
C13, C14
2
1M
R1, R10
1
4K7
R2
4
49R9
R3, R4, R12, R13
1
10R
R5
4
33R
R6, R7, R8, R9
2
220R
R11, R15
Show 1 more
QtyPartRefs
1
12K4
R16

DuetEthernet design files

The KiCad project lives in the Duet3D/Duet-2-Hardware repository on GitHub; these links point at the commit this page was built from.

DuetEthernet: common questions

What microcontroller does the DuetEthernet use?

The DuetEthernet is built around the LPC1768, from the NXP family.

How big is the DuetEthernet PCB?

The DuetEthernet measures 37.5 × 33.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DuetEthernet?

36 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DuetEthernet design files?

From the Duet3D/Duet-2-Hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the DuetEthernet design in my own project?

Yes, under the terms of its CERN-OHL-1.2 license, which Duet3D chose for the repository.

Can I test firmware for the DuetEthernet without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in Duet-2-Hardware

Similar boards