Expansion Breakout
Duet3D·Duet-2-Hardware·Duet_Expansion/Expansion_Breakoutv1.1/ExpBreakout.kicad_pcb
About the Expansion Breakout
Expansion Breakout is an open source NXP PCB design by Duet3D, published on GitHub under the CERN-OHL-1.2 license. It is a board measuring 88.5 × 28 mm, with 22 components from 15 distinct parts.
Its main chip is the LPC1768, from the NXP family. Other key parts include the LM1117, LM2594, KSZ8051 and A4982. By type, the board carries 8 connectors, 5 ICs, 5 capacitors and 4 modules.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
For info on the Duex2/5 see: https://duet3d.com/wiki/Duex2andDuex5_Features
For more info on the Duex4 expansion board see: http://blog.think3dprint3d.com/2015/04/duex4-v02a-minor-updates.html
Main components on the Expansion Breakout
Expansion Breakout bill of materials (BOM)
22 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LPC1768 75ALS192 | SOIC-16_3.9x9.9mm_Pitch1.27mm | U1 |
| 1 | LM1117 75ALS192 | SOIC-16_3.9x9.9mm_Pitch1.27mm | U2 |
| 1 | LM2594 75ALS192 | SOIC-16_3.9x9.9mm_Pitch1.27mm | U3 |
| 1 | KSZ8051 75ALS192 | SOIC-16_3.9x9.9mm_Pitch1.27mm | U4 |
| 1 | A4982 74HCT02 | TSSOP-14 | U5 |
| 4 | MOUNTING | Fixing_M4 | M4, M5, M6, M7 |
| 1 | CONN2X20 EXPANSION | PIN_ARRAY_25X2 | J1 |
| 1 | E2 | PIN_ARRAY_6x1 | P1 |
| 1 | E3 | PIN_ARRAY_6x1 | P2 |
| 1 | E4 | PIN_ARRAY_6x1 | P3 |
| 1 | E5 | PIN_ARRAY_6x1 | P4 |
| 1 | E6 | PIN_ARRAY_6x1 | P5 |
| 1 | H6_PWM | PIN_ARRAY_3X1 | P6 |
| 1 | H7_PWM | PIN_ARRAY_3X1 | P7 |
| 5 | 0u1 | C_0603 | C1, C2, C3, C4, C5 |
Expansion Breakout design files
The KiCad project lives in the Duet3D/Duet-2-Hardware repository on GitHub; these links point at the commit this page was built from.
Expansion Breakout: common questions
What microcontroller does the Expansion Breakout use?
The Expansion Breakout is built around the LPC1768, from the NXP family.
How big is the Expansion Breakout?
The Expansion Breakout measures 88.5 × 28 mm and is 1.6002 mm thick.
How many components are on the Expansion Breakout?
22 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Expansion Breakout design files?
From the Duet3D/Duet-2-Hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Expansion Breakout design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which Duet3D chose for the repository.
Can I test firmware for the Expansion Breakout without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in Duet-2-Hardware
ESP32
Duet 2
Duet3D
100 × 123 mm348 partsCERN-OHL-1.2258ESP8266
Duet WIFI
Duet3D
100 × 123 mm345 partsCERN-OHL-1.2258Microchip SAM
Duet 2 Maestro
Duet3D
100 × 123 mm336 partsCERN-OHL-1.2258NXP
Duex5
Duet3D
100 × 123 mm252 partsCERN-OHL-1.2258NXP
EthernetModule
Duet3D
37.4 × 33.8 mm36 parts2LCERN-OHL-1.2258NXP
DuetEthernet
Duet3D
37.5 × 33.8 mm36 parts2LCERN-OHL-1.2258
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532