Duet 2 Maestro
Duet3D·Duet-2-Hardware·Duet2/Duet2Maestro_v1.0/Duet2Maestro.kicad_pcb
About the Duet 2 Maestro PCB
Duet 2 Maestro is an open source Microchip SAM PCB design by Duet3D, published on GitHub under the CERN-OHL-1.2 license. It is a board measuring 100 × 123 mm, with 336 components from 136 distinct parts.
Its main chip is the ATSAM4S8C, from the Microchip SAM family. Other key parts include the LPC1768, LM1117, LM2594, KSZ8051 and A4982. By type, the board carries 124 capacitors, 99 resistors, 40 connectors, 20 diodes, 15 test points and 13 ICs.
From the project
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
The Duet 2 3D Printer Controller design files repository.
For hardware ourhcases see https://www.duet3d.com/
Duet Hardware runs RepRapFirmware: https://github.com/Duet3D/RepRapFirmware
Documentation: https://docs.duet3d.com/Duet3Dhardware/Duet2_family
Design by Tony Lock and David Crocker More info: https://www.duet3d.com/ LICENSE: see the LICENSE file in the repository
Main components on the Duet 2 Maestro
Duet 2 Maestro bill of materials (BOM)
336 components, 136 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LPC1768 E0_MOT | QFN-28-1EP_5x5mm_Pitch0.5mm | U1 |
| 1 | LM1117 AP7361C-33E-13 | SOT-223 | U2 |
| 1 | LM2594 A4403 | QFN16-4x4 | U3 |
| 1 | KSZ8051 X_MOT | QFN-28-1EP_5x5mm_Pitch0.5mm | U4 |
| 1 | A4982 E1_MOT | QFN-28-1EP_5x5mm_Pitch0.5mm | U5 |
| 1 | A4982 Y_MOT | QFN-28-1EP_5x5mm_Pitch0.5mm | U6 |
| 1 | A4982 Z_MOT | QFN-28-1EP_5x5mm_Pitch0.5mm | U7 |
| 1 | A4982 SN74CB3Q3251 | QSOP-16_3.9x4.9mm_Pitch0.635mm | U8 |
| 1 | W5500 | LQFP-48_7x7mm_Pitch0.5mm | U10 |
| 1 | 74HCT02 | TSSOP-14 | U11 |
| 1 | ATSAM4S8C | LQFP-100_14x14mm_Pitch0.5mm | U12 |
| 1 | 74HC125 | TSSOP-14 | U13 |
| 1 | 74HCT08 | TSSOP-14 | U14 |
| 4 | MOUNTING | Fixing_M4 | M4, M5, M6, M7 |
| 1 | 25MHZ CRYSTAL_4PIN | Xtal_5x3.2 | X1 |
| 1 | 12MHZ CRYSTAL_4PIN | Xtal_5x3.2 | X2 |
| 1 | CONN2X20 C TEMP | PIN_ARRAY_2X1 | J1 |
| 1 | CONN2X13 FAN2 | PIN_ARRAY_2X1 | J2 |
| 1 | I2C_2 5V V_FAN_A VIN | CONN_3x1 | J3 |
| 1 | CONN4 | screwt-barrier-9.5mm-1x4 | J4 |
Show 116 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BED TEMP | PIN_ARRAY_2X1 | J5 |
| 1 | CONN2X20 E1 MOT | PIN_ARRAY_4x1 | J6 |
| 1 | Z B | PIN_ARRAY_4x1 | J7 |
| 1 | Y MOT | PIN_ARRAY_4x1 | J8 |
| 1 | X MOT | PIN_ARRAY_4x1 | J9 |
| 1 | E0_MOT/STOP E0 MOT | PIN_ARRAY_4x1 | J10 |
| 1 | E0_HEATER E0 HEAT | 3.5MM_2X1 | J11 |
| 1 | E0_TEMP E0 TEMP | PIN_ARRAY_2X1 | J12 |
| 1 | FAN0 E1 HEAT | 3.5MM_2X1 | J13 |
| 1 | E1 TEMP | PIN_ARRAY_2X1 | J14 |
| 1 | uSDHC | uSD_SKT | J15 |
| 1 | E0 HEAT | PIN_ARRAY_2X1 | J16 |
| 1 | E1 HEAT | PIN_ARRAY_2X1 | J17 |
| 1 | E2 | PIN_ARRAY_8x1 | J18 |
| 1 | RJ45+MAG Z_STOP | PIN_ARRAY_3X1 | J19 |
| 1 | UART0 5V_PS | PIN_ARRAY_3X1 | J20 |
| 1 | Expansion | Pin_Header_Straight_1x13_Pitch2.54mm | J21 |
| 1 | USB | uUSB_new | J22 |
| 1 | 5V V_FAN_B VIN | CONN_3x1 | J23 |
| 1 | GND V_IN | PIN_ARRAY_2X1 | J24 |
| 1 | FAN0 | PIN_ARRAY_2X1 | J25 |
| 1 | E3 | PIN_ARRAY_8x1 | J26 |
| 1 | C_GND | 2.8mm_Spade_terminal | J27 |
| 1 | Probe | PIN_ARRAY_5x1 | J28 |
| 1 | FAN1 | PIN_ARRAY_2X1 | J29 |
| 1 | PanelDUE | PIN_ARRAY_4x1 | J30 |
| 1 | Y_STOP | PIN_ARRAY_3X1 | J32 |
| 1 | X_STOP | PIN_ARRAY_3X1 | J33 |
| 1 | E0_STOP | PIN_ARRAY_3X1 | J34 |
| 1 | E1_STOP | PIN_ARRAY_3X1 | J35 |
| 1 | Z A | PIN_ARRAY_4x1 | J36 |
| 1 | TEMP_DB | MAX_TEMP_DB | J37 |
| 1 | RJ45+MAG | RJ45+MAG | J38 |
| 1 | 12864_EXP2 | IDC_PIN_ARRAY_5x2 | P1 |
| 1 | 12864_EXP1 | IDC_PIN_ARRAY_5x2 | P2 |
| 1 | PanelDue_SD | IDC_PIN_ARRAY_5x2 | P3 |
| 1 | PPTC Resettable Fuse | R_1206 | F1 |
| 1 | ERASE | JUMPER | JP1 |
| 1 | I 5V EN | JUMPER | JP9 |
| 1 | E 5V EN | JUMPER | JP10 |
| 1 | RESET | SW_SIDE_1_lugs | S1 |
| 1 | Z_Stp_Tp | TPx3 | TP1 |
| 1 | Y_Stp_Tp | TPx3 | TP2 |
| 1 | X_Stp_Tp | TPx3 | TP3 |
| 1 | E0_Stp_Tp | TPx3 | TP4 |
| 1 | E1_Stp_Tp | TPx3 | TP5 |
| 10 | TP | TP_via | TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13 +2 |
| 4 | PMV40UN2 | SOT-23 | TR1, TR5, TR7, TR9 |
| 3 | IPD036N04L | D-PAK | TR2, TR4, TR8 |
| 1 | SS14M DB2W40300L | D_SOD-123F | D1 |
| 1 | SS14M BAT54C | SOT-23-D | D2 |
| 1 | USB | D_0603 | D3 |
| 1 | TS4148 Diag | D_0603 | D4 |
| 1 | TS4148 SOD-523F | SOD-523F | D5 |
| 1 | Bed Heat | D_0603 | D6 |
| 1 | E0 Heat | D_0603 | D7 |
| 3 | DO-219AB | DO-219AB | D8, D18, D21 |
| 2 | BAT54C | SOT-23-D | D9, D10 |
| 1 | SOD-523F | SOD-523F | D11 |
| 1 | DB2W40300L | D_SOD-123F | D12 |
| 2 | SS14M | uSMA | D13, D14 |
| 1 | VIN | D_0603 | D15 |
| 1 | 3.3V | D_0603 | D16 |
| 1 | 5V+ | D_0603 | D17 |
| 1 | E1 Heat | D_0603 | D20 |
| 1 | 10uH | L_6x6 | L1 |
| 1 | 1uH | C_1210 | L2 |
| 1 | 220 ohm, 3 A | R_0805 | L3 |
| 2 | L_MINI | R_0603 | L4, L7 |
| 2 | 10uH 100Mhz | R_0603 | L5, L6 |
| 4 | 10u 35V | C_1206 | C1, C6, C91, C94 |
| 7 | 0u01 | C_0603 | C2, C13, C79, C90, C110, C120, C127 |
| 7 | 100u 35V | C_ELEC_6.3x7.7 | C3, C12, C22, C31, C78, C83, C104 |
| 1 | 10u (<0R3 ESR) | C_0805 | C4 |
| 4 | 10u 10V | C_0805 | C7, C8, C10, C47 |
| 14 | 2u2 | C_0603 | C9, C11, C18, C19, C32, C33, C53, C58 +6 |
| 5 | 22n X7R 10% 16V | C_0603 | C14, C21, C56, C57, C92 |
| 26 | 0u1 | C_0603 | C15, C16, C26, C34, C35, C46, C48, C49 +18 |
| 5 | 0.1u 50V | C_0603 | C17, C28, C36, C37, C87 |
| 10 | 0u1 50V | C_0603 | C20, C23, C24, C38, C39, C59, C60, C75 +2 |
| 20 | 470p 100V | C_0603 | C25, C27, C29, C30, C63, C65, C71, C72 +12 |
| 5 | 2n2 | C_0603 | C40, C41, C42, C43, C111 |
| 2 | 10p | C_0603 | C44, C45 |
| 2 | 4u7 | C_0805 | C66, C119 |
| 2 | 22n | C_0603 | C96, C112 |
| 2 | 10u | C_1206 | C97, C98 |
| 1 | 220u 10V | C_ELEC_6.3x7.7 | C99 |
| 1 | 0u01 +200V | C_0603 | C106 |
| 2 | 6n8 | C_0603 | C108, C109 |
| 2 | 10u | C_0805 | C114, C116 |
| 2 | 18p | C_0603 | C121, C122 |
| 3 | 2K2 | R_0603 | R1, R61, R104 |
| 2 | 27R | R_0603 | R2, R3 |
| 5 | 22K | R_0603 | R4, R5, R8, R9, R28 |
| 10 | 0R075 1% 0.33W | R_0603_Large_Pads | R6, R7, R17, R18, R26, R27, R29, R32 +2 |
| 23 | 10K | R_0603 | R10, R11, R12, R16, R24, R51, R56, R57 +15 |
| 1 | 1R | R_0603 | R13 |
| 5 | 1K | R_0603 | R14, R30, R42, R43, R66 |
| 4 | 2K2 0.1% | R_0603 | R15, R19, R21, R53 |
| 4 | 180R | R_0603 | R20, R23, R60, R97 |
| 8 | 220R | R_0603 | R22, R25, R36, R38, R48, R77, R78, R79 |
| 2 | 47K | R_0603 | R31, R80 |
| 2 | 1M | R_0603 | R35, R89 |
| 1 | 27K | R_0603 | R37 |
| 4 | 49R9 | R_0603 | R39, R40, R41, R44 |
| 1 | 10R | R_0603 | R45 |
| 4 | 33R | R_0603 | R46, R47, R49, R50 |
| 1 | 12K4 | R_0603 | R52 |
| 10 | 4K7 | R_0603 | R54, R55, R65, R67, R76, R81, R82, R92 +2 |
| 2 | 100R | R_0603 | R68, R73 |
| 1 | 0R | R_0603 | R74 |
| 1 | 15R | R_0603 | R90 |
| 1 | 100K | R_0603 | R93 |
| 2 | 0R1 1% >=250mW | R_1206 | R94, R100 |
| 1 | 3K92 | R_0603 | R101 |
| 1 | 750R | R_0603 | R102 |
Duet 2 Maestro design files
The KiCad project lives in the Duet3D/Duet-2-Hardware repository on GitHub; these links point at the commit this page was built from.
Duet 2 Maestro: common questions
What microcontroller does the Duet 2 Maestro use?
The Duet 2 Maestro is built around the ATSAM4S8C, from the Microchip SAM family.
How big is the Duet 2 Maestro PCB?
The Duet 2 Maestro measures 100 × 123 mm and is 1.6002 mm thick.
How many components are on the Duet 2 Maestro?
336 components, from 136 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Duet 2 Maestro design files?
From the Duet3D/Duet-2-Hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Duet 2 Maestro design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which Duet3D chose for the repository.
Can I test firmware for the Duet 2 Maestro without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in Duet-2-Hardware
ESP32
Duet 2
Duet3D
100 × 123 mm348 partsCERN-OHL-1.2258ESP8266
Duet WIFI
Duet3D
100 × 123 mm345 partsCERN-OHL-1.2258NXP
Duex5
Duet3D
100 × 123 mm252 partsCERN-OHL-1.2258NXP
EthernetModule
Duet3D
37.4 × 33.8 mm36 parts2LCERN-OHL-1.2258NXP
DuetEthernet
Duet3D
37.5 × 33.8 mm36 parts2LCERN-OHL-1.2258NXP
Expansion Breakout
Duet3D
88.5 × 28 mm22 partsCERN-OHL-1.2258
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416