Duet 2
Duet3D·Duet-2-Hardware·Duet2/Duet2v1.05/Duet2.kicad_pcb
About the Duet 2 PCB
Duet 2 is an open source ESP32 PCB design by Duet3D, published on GitHub under the CERN-OHL-1.2 license. It is a board measuring 100 × 123 mm, with 348 components from 132 distinct parts.
Its main chip is the KSZ8051, from the ESP32 family. Other key parts include the LPC1768, LM1117, LM2594, A4982 and MCP44X1. By type, the board carries 121 capacitors, 112 resistors, 34 connectors, 26 diodes, 16 test points and 12 ICs.
It belongs with the iot & wireless designs in this gallery.
From the project
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
The Duet 2 3D Printer Controller design files repository.
For hardware ourhcases see https://www.duet3d.com/
Duet Hardware runs RepRapFirmware: https://github.com/Duet3D/RepRapFirmware
Documentation: https://docs.duet3d.com/Duet3Dhardware/Duet2_family
Design by Tony Lock and David Crocker More info: https://www.duet3d.com/ LICENSE: see the LICENSE file in the repository
Main components on the Duet 2
Duet 2 bill of materials (BOM)
348 components, 132 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LPC1768 ATSAM4E8E | LQFP144 | U1 |
| 1 | LM1117 AP7361C-33E-13 | SOT-223 | U2 |
| 1 | LM2594 A4403 | QFN16-4x4 | U3 |
| 1 | KSZ8051 ESP-WROOM-02 | ESP-WROOM-02 | U4 |
| 4 | A4982 TMC2660 | TMC2660 | U5, U6, U7, U8 |
| 1 | MCP44X1 TMC2660 | TMC2660 | U9 |
| 1 | 74HC125 | TSSOP-14 | U10 |
| 1 | 74HCT02 | TSSOP-14 | U11 |
| 1 | 74HC32 | TSSOP-14 | U13 |
| 4 | MOUNTING | Fixing_M4 | M4, M5, M6, M7 |
| 1 | 12MHZ CRYSTAL_4PIN | Xtal_5x3.2 | X2 |
| 1 | CONN2X20 EXPANSION | PIN_ARRAY_25X2 | J1 |
| 1 | CONN2X13 FAN2 | PIN_ARRAY_2X1 | J2 |
| 1 | I2C_2 5V V_FAN VIN | CONN_3x1 | J3 |
| 1 | BED HEAT | TERM_2-WAY_6.35mm | J4 |
| 1 | BED TEMP | PIN_ARRAY_2X1 | J5 |
| 1 | CONN2X20 E1 MOT | PIN_ARRAY_4x1 | J6 |
| 1 | Z B | PIN_ARRAY_4x1 | J7 |
| 1 | Y MOT | PIN_ARRAY_4x1 | J8 |
| 1 | X MOT | PIN_ARRAY_4x1 | J9 |
Show 112 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | E0_MOT/STOP E0 MOT | PIN_ARRAY_4x1 | J10 |
| 1 | E0_HEATER E0 HEAT | 3.5MM_2X1 | J11 |
| 1 | E0_TEMP E0 TEMP | PIN_ARRAY_2X1 | J12 |
| 1 | FAN0 E1 HEAT | 3.5MM_2X1 | J13 |
| 1 | E1 TEMP | PIN_ARRAY_2X1 | J14 |
| 1 | uSDHC | uSD_SKT | J15 |
| 1 | CONN_ALT_HEADER | CONN_ALT_HEADER_v2 | J16 |
| 1 | RJ45+MAG Z_STOP | PIN_ARRAY_3X1 | J19 |
| 1 | UART0 5V_PS | PIN_ARRAY_3X1 | J20 |
| 1 | USB | uUSB_new | J22 |
| 1 | VIN | TERM_2-WAY_6.35mm | J23 |
| 2 | GND V_IN | PIN_ARRAY_2X1 | J24, J31 |
| 1 | FAN0 | PIN_ARRAY_2X1 | J25 |
| 1 | Probe | PIN_ARRAY_4x1 | J28 |
| 1 | FAN1 | PIN_ARRAY_2X1 | J29 |
| 1 | PanelDUE | PIN_ARRAY_4x1 | J30 |
| 1 | Y_STOP | PIN_ARRAY_3X1 | J32 |
| 1 | X_STOP | PIN_ARRAY_3X1 | J33 |
| 1 | E0_STOP | PIN_ARRAY_3X1 | J34 |
| 1 | E1_STOP | PIN_ARRAY_3X1 | J35 |
| 1 | Z A | PIN_ARRAY_4x1 | J36 |
| 1 | SPI0 | MAX_TEMP_DB | J37 |
| 1 | CONN_SD | IDC_PIN_ARRAY_5x2 | P1 |
| 1 | EXP_ALT | IDC_PIN_ARRAY_5x2 | P2 |
| 1 | PPTC Resettable Fuse | R_1206 | F1 |
| 1 | FAN FUSE | MCCQ-122-minibladefuseholder | F2 |
| 1 | EXT/STEP FUSE | MCCQ-122-minibladefuseholder | F3 |
| 1 | BED FUSE | MCCQ-122-minibladefuseholder | F4 |
| 1 | ERASE | JUMPER | JP1 |
| 1 | I 5V EN | JUMPER | JP9 |
| 1 | E 5V EN | JUMPER | JP10 |
| 1 | RESET | SW_SIDE_1_lugs | S1 |
| 2 | Z_Stp_Tp | CONN_3x1 | TP1, TP5 |
| 1 | Y_Stp_Tp | CONN_3x1 | TP2 |
| 1 | X_Stp_Tp | CONN_3x1 | TP3 |
| 1 | E0_Stp_Tp | CONN_3x1 | TP4 |
| 11 | TP | TP_via | TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13 +3 |
| 4 | PMV40UN2 | SOT-23 | TR1, TR5, TR7, TR9 |
| 1 | IPD036N04L | D-PAK | TR2 |
| 2 | AOD4184A | D-PAK | TR4, TR8 |
| 2 | SS14M DB2W40300L | D_SOD-123F | D1, D2 |
| 1 | USB | D_0603 | D3 |
| 1 | TS4148 Diag | D_0603 | D4 |
| 1 | TS4148 SOD-523F | SOD-523F | D5 |
| 1 | Bed Heat | D_0603 | D6 |
| 1 | E0 Heat | D_0603 | D7 |
| 3 | DO-219AB | DO-219AB | D8, D18, D21 |
| 1 | Y Stop | D_0603 | D9 |
| 1 | Z Stop | D_0603 | D10 |
| 1 | E0stp | D_0603 | D11 |
| 1 | X Stop | D_0603 | D12 |
| 2 | SS14M | uSMA | D13, D14 |
| 1 | VIN | D_0603 | D15 |
| 1 | 3.3V | D_0603 | D16 |
| 1 | 5V+ | D_0603 | D17 |
| 1 | E1stp | D_0603 | D19 |
| 1 | E1 Heat | D_0603 | D20 |
| 3 | BAT54C | SOT-23-D | D22, D23, D24 |
| 1 | SOD-523F | SOD-523F | D25 |
| 1 | WIFI | D_0603 | D26 |
| 1 | 10uH | L_6x6 | L1 |
| 1 | 1uH | C_1210 | L2 |
| 1 | 220 ohm, 3 A | R_0805 | L3 |
| 1 | MFB-201209-0011PW | R_0805 | L4 |
| 2 | 10uH 100Mhz | R_0603 | L5, L6 |
| 1 | BLM18PG121SN1 | L_0603_1608Metric | L7 |
| 8 | 10u 35V | C_1206 | C1, C4, C6, C7, C91, C94, C97, C98 |
| 4 | 0u01 | C_0603 | C2, C13, C79, C81 |
| 7 | 100u 35V | C_ELEC_6.3x7.7 | C3, C12, C22, C23, C32, C33, C102 |
| 27 | 0u1 | C_0603 | C5, C9, C11, C16, C26, C27, C36, C37 +19 |
| 4 | 10u | C_0805 | C8, C10, C47, C93 |
| 10 | 0u01 X7R 10% 50V | C_0603 | C14, C15, C28, C29, C38, C39, C56, C57 +2 |
| 10 | 2u2 | C_0603 | C18, C19, C53, C58, C59, C60, C63, C65 +2 |
| 5 | 0u47 | C_0603 | C20, C21, C30, C31, C100 |
| 5 | 0u1 50V | C_0603 | C24, C25, C34, C35, C103 |
| 6 | 2n2 | C_0603 | C40, C41, C42, C43, C90, C111 |
| 2 | 10p | C_0603 | C44, C45 |
| 1 | 4u7 | C_0805 | C66 |
| 1 | DNP - 220p X7R 50V | C_0603 | C73 |
| 1 | DNP - 2n2 X7R 50V | C_0603 | C74 |
| 5 | 1u 50V | C_0603 | C75, C76, C77, C78, C101 |
| 20 | 1n >50V | C_0603 | C85, C86, C87, C88, C89, C106, C107, C108 +12 |
| 1 | DNP | C_0603 | C92 |
| 1 | 2n2 X7R 50V | C_0603 | C95 |
| 1 | 22nF | C_0603 | C96 |
| 1 | 220u 25V | C_ELEC_6.3x7.7 | C99 |
| 1 | 0u1 35V | C_0603 | C125 |
| 4 | 2K2 | R_0603 | R1, R17, R61, R104 |
| 2 | 27R 1% | R_0603 | R2, R3 |
| 12 | 4K7 | R_0603 | R4, R18, R54, R55, R65, R67, R98, R110 +4 |
| 3 | 470R | R_0603 | R5, R49, R103 |
| 21 | 10K | R_0603 | R6, R7, R8, R9, R10, R11, R12, R24 +13 |
| 1 | 1R | R_0603 | R13 |
| 12 | 1K | R_0603 | R14, R42, R43, R66, R69, R70, R71, R72 +4 |
| 3 | 4K7 0.1% | R_0603 | R19, R21, R53 |
| 5 | 180R | R_0603 | R20, R23, R60, R97, R109 |
| 6 | 220R | R_0603 | R22, R25, R48, R77, R78, R79 |
| 10 | 22R | R_0603 | R26, R27, R28, R29, R38, R39, R40, R41 +2 |
| 1 | 68R | R_0603 | R30 |
| 1 | 47K | R_0603 | R31 |
| 10 | 0R051 | R_1206 | R32, R33, R34, R35, R44, R45, R46, R47 +2 |
| 7 | 100R | R_0603 | R36, R52, R68, R100, R101, R105, R107 |
| 1 | 27K | R_0603 | R37 |
| 4 | DNP 47K | R_0603 | R73, R74, R75, R76 |
| 1 | 47K 1% | R_0603 | R80 |
| 1 | 4K7 1% | R_0603 | R81 |
| 1 | 100K | R_0603 | R84 |
| 2 | 0R15 0.33W | R_0805 | R85, R86 |
| 1 | 3K6 | R_0603 | R87 |
| 1 | 680R | R_0603 | R88 |
| 1 | 2R2 0.33W | R_0805 | R92 |
| 1 | 0R | R_0603 | R108 |
Duet 2 design files
The KiCad project lives in the Duet3D/Duet-2-Hardware repository on GitHub; these links point at the commit this page was built from.
Duet 2: common questions
What microcontroller does the Duet 2 use?
The Duet 2 is built around the KSZ8051, from the ESP32 family.
How big is the Duet 2 PCB?
The Duet 2 measures 100 × 123 mm and is 1.6002 mm thick.
How many components are on the Duet 2?
348 components, from 132 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Duet 2 design files?
From the Duet3D/Duet-2-Hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Duet 2 design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which Duet3D chose for the repository.
Can I test firmware for the Duet 2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Duet-2-Hardware
ESP8266
Duet WIFI
Duet3D
100 × 123 mm345 partsCERN-OHL-1.2258Microchip SAM
Duet 2 Maestro
Duet3D
100 × 123 mm336 partsCERN-OHL-1.2258NXP
Duex5
Duet3D
100 × 123 mm252 partsCERN-OHL-1.2258NXP
EthernetModule
Duet3D
37.4 × 33.8 mm36 parts2LCERN-OHL-1.2258NXP
DuetEthernet
Duet3D
37.5 × 33.8 mm36 parts2LCERN-OHL-1.2258NXP
Expansion Breakout
Duet3D
88.5 × 28 mm22 partsCERN-OHL-1.2258
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k