5 open source boards using the 74LVC1G125DBV

Real designs built with the 74LVC1G125DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The 74LVC1G125DBV in open source designs

The gallery holds 5 open source boards using the 74LVC1G125DBV from 3 GitHub repositories; a typical one measures about 58 × 85 mm and carries around 118 components.

80% use four copper layers or more, and 80% carry an open source license.

The most starred is I2S-Hat by raptorlightning.

Microcontrollers on boards using the 74LVC1G125DBV

What boards using the 74LVC1G125DBV are built for

74LVC1G125DBV: common questions

Where can I find a 74LVC1G125DBV reference design?

Each of the 5 boards on this page is a real design using the 74LVC1G125DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 74LVC1G125DBV?

The 93C76B, BMI-S-204-F, CP11009, DP83848CVV and FT2232ST appear in the most repositories here.

Which microcontrollers do boards using the 74LVC1G125DBV use?

Most are built on STM32 (3) and AVR/Arduino (1).

How big is a typical board using the 74LVC1G125DBV?

The median is 58 × 85 mm, and 20% are two-layer designs.

What is the most popular open source board using the 74LVC1G125DBV?

By GitHub stars, I2S-Hat by raptorlightning, with 19 stars.

Can I simulate one of these boards using the 74LVC1G125DBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part