Crawler robot
EduardKurbanov·crawler_robot·robot_pocketbeagle_pcb/robot_pocketbeagle.kicad_pcb
About the Crawler robot PCB
Crawler robot is an open source PCB design by EduardKurbanov, published on GitHub. It is a 2-layer board measuring 75 × 100 mm, with 100 components from 46 distinct parts.
Other key parts include the PC817, 74HC00, LM358 and L7805_REZERV. By type, the board carries 57 resistors, 23 connectors, 7 transistors, 6 capacitors, 5 ICs and 1 buzzer.
It belongs with the robotics & motion designs in this gallery.
Main components on the Crawler robot
Crawler robot bill of materials (BOM)
100 components, 46 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | PC817 | DIP-4_W7.62mm | U1, U2 |
| 1 | 74HC00 | SO-14_3.9x8.65mm_P1.27mm | U3 |
| 1 | LM358 | SO-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | L7805_REZERV | TO-252-2 | U5 |
| 4 | BC847 | SOT-23 | Q1, Q2, Q4, Q5 |
| 3 | QM6015D | TO-252-2 | Q3, Q6, Q7 |
| 1 | QMC5883L | PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | USB_A | USB_A_CONNFLY_DS1095-WNR0 | J2 |
| 1 | UART0 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | P1 | PinHeader_2x18_P2.54mm_Vertical | J4 |
| 1 | MPU6050 | PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | ADS1115 | PinHeader_1x10_P2.54mm_Vertical | J6 |
| 1 | P2 | PinHeader_2x18_P2.54mm_Vertical | J7 |
| 1 | Conn_i2c2 | PinSocket_1x04_P2.54mm_Vertical | J8 |
| 1 | OUT_DVR8833 | PinSocket_1x08_P2.54mm_Vertical | J9 |
| 1 | driver_dvr8833 | PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | IN_DVR8833 | PinSocket_1x08_P2.54mm_Vertical | J12 |
| 1 | 9V_DC_DC | TerminalBlock_bornier-2_P5.08mm | J13 |
| 1 | servo_x_y | PinHeader_1x06_P2.54mm_Vertical | J14 |
| 1 | shr05 | PinHeader_1x04_P2.54mm_Vertical | J15 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 5V_DC_DC | TerminalBlock_bornier-2_P5.08mm | J16 |
| 1 | Conn_GND | PinSocket_1x09_P2.54mm_Vertical | J17 |
| 1 | Conn_5V | PinSocket_1x02_P2.54mm_Vertical | J18 |
| 1 | Conn_pwm_out_b | PinSocket_1x03_P2.54mm_Vertical | J19 |
| 1 | Conn_pwm_out_a | PinSocket_1x03_P2.54mm_Vertical | J20 |
| 1 | Conn_P2_3.3V | PinSocket_1x05_P2.54mm_Vertical | J21 |
| 1 | Conn_AIN_4.096_3.3_1.8V | PinSocket_1x06_P2.54mm_Vertical | J29 |
| 1 | Conn_5V | PinSocket_1x05_P2.54mm_Vertical | J30 |
| 1 | Conn_GPI028_34 | PinSocket_1x04_P2.54mm_Vertical | J31 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | LED | LED_D3.0mm | D1 |
| 5 | 100n | C_0805_2012Metric | C1, C2, C3, C4, C6 |
| 1 | 330n | C_0805_2012Metric | C5 |
| 2 | 300 | R_0805_2012Metric | R1, R2 |
| 16 | 1K | R_0805_2012Metric | R3, R4, R5, R9, R11, R12, R13, R17 +8 |
| 4 | 27 | R_0805_2012Metric | R6, R7, R38, R39 |
| 1 | 2.4K | R_0805_2012Metric | R8 |
| 3 | 2K | R_0805_2012Metric | R10, R18, R30 |
| 5 | 1.5k | R_0805_2012Metric | R14, R21, R31, R48, R52 |
| 1 | 750 | R_0805_2012Metric | R15 |
| 1 | 4.3K | R_0805_2012Metric | R16 |
| 2 | 10K | R_0805_2012Metric | R19, R20 |
| 8 | 0 | R_0805_2012Metric | R24, R25, R26, R27, R28, R29, R49, R51 |
| 10 | 0 | R_1206_3216Metric | R32, R33, R34, R35, R36, R37, R40, R50 +2 |
| 1 | 680 | R_0805_2012Metric | R41 |
| 3 | 100K | R_0805_2012Metric | R43, R46, R47 |
Crawler robot design files
The KiCad project lives in the EduardKurbanov/crawler_robot repository on GitHub; these links point at the commit this page was built from.
Crawler robot: common questions
How big is the Crawler robot PCB?
The Crawler robot measures 75 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Crawler robot?
100 components, from 46 distinct parts. The full bill of materials is listed on this page.
Where can I download the Crawler robot design files?
From the EduardKurbanov/crawler_robot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Crawler robot design in my own project?
The repository has no license, so all rights stay with EduardKurbanov. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979