KiCAD Keypad

EesaWithTheShot·Macropad·kiCAD/kiCAD Keypad.kicad_pcb

KiCAD Keypad PCB layout, top view — open source ESP32 board by EesaWithTheShot

About the KiCAD Keypad PCB

KiCAD Keypad is an open source ESP32 PCB design by EesaWithTheShot, published on GitHub. It is a 4-layer board measuring 93.3 × 155.8 mm, with 65 components from 20 distinct parts.

Its main chip is the ESP32-S3-MINI-1-N8, from the ESP32 family. Other key parts include the USBLC6-2SC6 and AP2112K-3.3TRG1. By type, the board carries 24 switches, 22 diodes, 7 resistors, 6 capacitors, 3 ICs and 3 connectors.

It belongs with the keyboards designs in this gallery.

Main components on the KiCAD Keypad

KiCAD Keypad bill of materials (BOM)

65 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2SC6
STMicroelectronics
U2
1
ESP32-S3-MINI-1-N8
ESP32-S3-MINI-1
Espressif Systems
U3
1
AP2112K-3.3TRG1
AP2112K-3.3
Diodes Incorporated
U4
1
USB4105-GF-A
USB_C_Receptacle_USB2.0_16P
GCT
J1
1
C5116483
Conn_01x04
J2
1
NPTC082KFMS-RC
2x8 GPIO for SPI
Sullins Connector Solutions
J3
19
MMD Princess Tactiles
Keyswitch
MMD
S1, S2, S3, S4, S5, S6, S7, S8 +11
1
MMD Princess Tactiles
Keyswitch
MMD
S19
1
MMD Princess Tactiles
Keyswitch
MMD
S20
1
PTS647SN50SMTR2 LFS
RESET
C&K
SW1
1
PTS647SN50SMTR2 LFS
BOOT
C&K
SW2
1
PEC11R-4215F-S0024
RotaryEncoder_Switch
Bourns
SW3
21
1N4148
D
onsemi
D1, D2, D3, D4, D5, D6, D7, D8 +13
1
150040RS73240
LED
Würth Elektronik
D22
3
C1525
0u1F
Aillen
C1, C3, C4
1
GRM21BR61C106KE15K
10uF
Murata Electronics
C2
2
0805B105K500NT
1uF
Aillen
C5, C6
4
RC0603FR-0710KL
10k
YAGEO
R1, R2, R5, R6
2
RC0603FR-075K1L
5k1
YAGEO
R3, R4
1
RC0402FR-07221RL
220R
YAGEO
R7

KiCAD Keypad design files

The KiCad project lives in the EesaWithTheShot/Macropad repository on GitHub; these links point at the commit this page was built from.

KiCAD Keypad: common questions

What microcontroller does the KiCAD Keypad use?

The KiCAD Keypad is built around the ESP32-S3-MINI-1-N8, from the ESP32 family.

How big is the KiCAD Keypad PCB?

The KiCAD Keypad measures 93.3 × 155.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the KiCAD Keypad?

65 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the KiCAD Keypad design files?

From the EesaWithTheShot/Macropad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the KiCAD Keypad design in my own project?

The repository has no license, so all rights stay with EesaWithTheShot. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the KiCAD Keypad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Macropad

Similar boards