HardLabs

Stm32-RedBoard

EJ-JATIMohammed·stm32-RedBoard

Stm32-RedBoard PCB layout, top view — open source STM32 board by EJ-JATIMohammed

About the Stm32-RedBoard PCB

Stm32-RedBoard is an open source STM32 PCB design by EJ-JATIMohammed, published on GitHub. It is a 8-layer board measuring 53.6 × 77.4 mm, with 59 components from 34 distinct parts.

Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the CH340C, USBLC6-2SC6, AP2112K-1.2 and SN65HVD230. By type, the board carries 18 capacitors, 17 resistors, 7 connectors, 6 ICs, 5 switches and 4 diodes.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Custom STM32F103C8T6 development board designed with KiCad, featuring USB-C, Micro-USB, CAN, Micro-SD, SWD and GPIO interfaces.

Main components on the Stm32-RedBoard

CH340CUSBLC6-2SC6AP2112K-1.2STM32F103C8TxSN65HVD230

Stm32-RedBoard bill of materials (BOM)

59 components, 34 distinct parts.

QtyPartRefs
1
CH340C
U1
2
USBLC6-2SC6
U2, U3
1
AP2112K-1.2
U4
1
STM32F103C8Tx
U5
1
SN65HVD230
U6
1
32K760
Y1
1
8M
Y2
1
USB_B_Micro
J1
1
USB_C_Receptacle_USB2.0_16P
J2
1
Conn_02x03_Odd_Even
J3
1
Micro_SD_Card
J4
1
Conn_01x04
J5
1
Conn_02x23_Counter_Clockwise
J6
1
Conn_01x02
J7
2
SW_Slide_DPDT
SW1, SW2
3
SW_Push
SW7, SW8, SW9
2
ESD5Zxx
D1, D2
1
LED_GRBK
D3
1
LED
D4
2
10u
C1, C18
Show 14 more
QtyPartRefs
3
0u1
C2, C3, C4
2
100n
C5, C11
4
4u7
C6, C8, C9, C10
1
1u
C12
2
10n
C13, C19
2
30p
C14, C15
2
12p
C16, C17
6
1K5
R1, R2, R6, R14, R15, R16
2
0K
R3, R17
2
100K
R4, R5
1
100
R7
1
200K
R8
1
5M
R9
4
10K
R10, R11, R12, R13

Stm32-RedBoard design files

The KiCad project lives in the EJ-JATIMohammed/stm32-RedBoard repository on GitHub; these links point at the commit this page was built from.

Stm32-RedBoard: common questions

What microcontroller does the Stm32-RedBoard use?

The Stm32-RedBoard is built around the STM32F103C8Tx, from the STM32 family.

How big is the Stm32-RedBoard PCB?

The Stm32-RedBoard measures 53.6 × 77.4 mm, has 8 copper layers and is 1.6 mm thick.

How many components are on the Stm32-RedBoard?

59 components, from 34 distinct parts. The full bill of materials is listed on this page.

Where can I download the Stm32-RedBoard design files?

From the EJ-JATIMohammed/stm32-RedBoard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Stm32-RedBoard design in my own project?

The repository has no license, so all rights stay with EJ-JATIMohammed. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stm32-RedBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards