HardLabs

Right

elecage·DU_AT·OneHandKeyboard/circuit/right/right.kicad_pcb

Right PCB layout, top view — open source RP2040/RP2350 board by elecage

About the Right PCB

Right is an open source RP2040/RP2350 PCB design by elecage, published on GitHub. It is a 2-layer board measuring 132.6 × 112.1 mm, with 95 components from 20 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the SRV05-4, W25Q128JVSIQ and XC6206P332MR. By type, the board carries 29 diodes, 16 capacitors, 9 resistors, 6 connectors, 4 ICs and 1 crystal.

From the project

지역기반 보조기기 R&SD

Main components on the Right

RP2040SRV05-4W25Q128JVSIQXC6206P332MR

Right bill of materials (BOM)

95 components, 20 distinct parts.

QtyPartRefs
1
RP2040
U1
1
SRV05-4
U2
1
W25Q128JVSIQ
U3
1
XC6206P332MR
U4
1
X322512MSB4SI
Y1
2
TYPE-C-31-M-13
J1, J2
1
SWD_PinSocket
J3
1
PinSocket_4P
J4
1
PinSocket_5P
J6
1
side_b_PinSocket
J7
1
MF-MSMF050-2
F2
28
kailh hotswap socket
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +20
1
kailh hotswap socket
MX27
29
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +21
9
100n
C1, C2, C4, C5, C6, C7, C8, C9 +1
5
1u
C3, C11, C12, C13, C14
2
22p
C15, C16
2
27
R1, R2
5
5.1k
R3, R4, R5, R6, R8
2
1k
R7, R9

Right design files

The KiCad project lives in the elecage/DU_AT repository on GitHub; these links point at the commit this page was built from.

Right: common questions

What microcontroller does the Right use?

The Right is built around the RP2040, from the RP2040/RP2350 family.

How big is the Right PCB?

The Right measures 132.6 × 112.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Right?

95 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the Right design files?

From the elecage/DU_AT repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Right design in my own project?

The repository has no license, so all rights stay with elecage. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Right without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in DU_AT

Similar boards