Flipper UWB
About the Flipper UWB PCB
Flipper UWB is an open source PCB design by ElectronicCats, published on GitHub. It is a 2-layer board measuring 34 × 67 mm, with 13 components from 8 distinct parts.
Other key parts include the DWM1000. By type, the board carries 5 resistors, 4 diodes, 2 connectors, 1 IC and 1 capacitor.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
From the project
Flipper addons by Electronic Cats
This repository contains a collection of our Add-Ons for Flipper, the open-source hardware platform for hacking and security research.
Please read the document Contribution Manual which will show you how to contribute your changes to the project.
See Electronic Cats CLA for more information.
See the community code of conduct for a vision of the community we want to build and what we expect from it.
Main components on the Flipper UWB
Flipper UWB bill of materials (BOM)
13 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DWM1000 | DWM1000 | IC1 |
| 1 | CONN_01X10_SOCKET Conn_01x08_Socket | PinHeader_1x08_P2.54mm_Horizontal | J1 |
| 1 | CONN_01X08_SOCKET Conn_01x10_Socket | PinHeader_1x10_P2.54mm_Horizontal | J2 |
| 4 | LED | LED_0805_2012Metric | D1, D2, D3, D4 |
| 1 | 0.1UF 100uF | C_0805_2012Metric | C1 |
| 1 | 56K 1K | R_0805_2012Metric | R1 |
| 2 | 100R 1K | R_0805_2012Metric | R2, R4 |
| 2 | 1K | R_0805_2012Metric | R3, R5 |
Flipper UWB design files
The KiCad project lives in the ElectronicCats/flipper-addons repository on GitHub; these links point at the commit this page was built from.
Flipper UWB: common questions
How big is the Flipper UWB PCB?
The Flipper UWB measures 34 × 67 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Flipper UWB?
13 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Flipper UWB design files?
From the ElectronicCats/flipper-addons repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Flipper UWB design in my own project?
The repository has no license, so all rights stay with ElectronicCats. Use it as a reference, and ask the author before reusing the design.
More boards in flipper-addons
Flipper subg
67 × 31.3 mm41 parts4LNo license130
ESP32Marauder
67 × 28 mm31 parts2LNo license130
ESP32Marauder spoof
75 × 74.7 mm26 parts2LNo license130
FLIPPER ETHERNET
67 × 25 mm25 parts2LNo license130
CANBUS Flipper
67 × 21.3 mm24 parts2LNo license130
FLIPPER MOD BUS
62.8 × 23.2 mm15 parts2LNo license130
Mags
66 × 73.1 mm10 parts2LNo license130
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979