Mags
About the Mags PCB
Mags is an open source PCB design by ElectronicCats, published on GitHub. It is a 2-layer board measuring 66 × 73.1 mm, with 10 components from 10 distinct parts.
Other key parts include the SX1262IMLTRT. By type, the board carries 6 connectors, 1 IC, 1 switch, 1 inductor and 1 capacitor.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
From the project
Flipper addons by Electronic Cats
Flipper Magspoof is a device that can spoof/emulate any magnetic stripe or credit card. It can work “wirelessly”, even on standard magstripe/credit card readers, by generating a strong electromagnetic field that emulates a traditional magnetic stripe card.
Main components on the Mags
Mags bill of materials (BOM)
10 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SX1262IMLTRT TC4424 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | CONN_01X10_SOCKET Coil | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | CONN_01X08_SOCKET Conn_01x10_Socket | PinHeader_1x10_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x08_Socket | PinHeader_1x08_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x08_Socket | PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | Conn_01x10_Socket | PinHeader_1x10_P2.54mm_Vertical | J5 |
| 1 | Coil | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | On | JS102011SAQN | SW1 |
| 1 | 15UH 30t_30mm | Coil_30t_30mm_0.2_0.2_0.6_0.3 | L1 |
| 1 | 0.1UF 10uF | C_0603_1608Metric | C1 |
Mags design files
The KiCad project lives in the ElectronicCats/flipper-addons repository on GitHub; these links point at the commit this page was built from.
Mags: common questions
How big is the Mags PCB?
The Mags measures 66 × 73.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mags?
10 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mags design files?
From the ElectronicCats/flipper-addons repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mags design in my own project?
The repository has no license, so all rights stay with ElectronicCats. Use it as a reference, and ask the author before reusing the design.
More boards in flipper-addons
Flipper subg
67 × 31.3 mm41 parts4LNo license130
ESP32Marauder
67 × 28 mm31 parts2LNo license130
ESP32Marauder spoof
75 × 74.7 mm26 parts2LNo license130
FLIPPER ETHERNET
67 × 25 mm25 parts2LNo license130
CANBUS Flipper
67 × 21.3 mm24 parts2LNo license130
FLIPPER MOD BUS
62.8 × 23.2 mm15 parts2LNo license130
Flipper UWB
34 × 67 mm13 parts2LNo license130
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979