Rpi board
About the Rpi board
Rpi board is an open source Raspberry Pi PCB design by elkel53930, published on GitHub. It is a 4-layer board measuring 70 × 66.6 mm, with 32 components from 16 distinct parts.
Its main chip is the ComputeModule4, from the Raspberry Pi family. Other key parts include the MCP3221 and 74LVC1G07SE-7. By type, the board carries 10 resistors, 9 capacitors, 6 connectors, 2 ICs, 2 transistors and 2 diodes.
From the project
Manual RoboSweep Agent
Main components on the Rpi board
Rpi board bill of materials (BOM)
32 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP3221 | SOT-23-5 | U1 |
| 1 | 74LVC1G07SE-7 | SOT-353_SC-70-5 | U2 |
| 2 | IRLML6344 | SOT-23 | Q1, Q2 |
| 1 | B2B-ZR | JST_ZH_B2B-ZR_1x02_P1.50mm_Vertical | J1 |
| 1 | Conn_01x10 | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | PinHeader | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | FH12-22S-0.5SH | Hirose_FH12-22S-0.5SH_1x22-1MP_P0.50mm_Horizontal | J4 |
| 2 | FSS-42085-03 | PinHeader_2x03_P2.54mm_Vertical | J5, J6 |
| 1 | ComputeModule4 | Raspberry-Pi-4-Compute-Module | Module1 |
| 1 | D-060306G1/SS2/G1 | LED_0603_1608Metric | D1 |
| 1 | KT-0603R | LED_0603_1608Metric | D2 |
| 4 | CC0603KRX7R9BB104 | C_0603_1608Metric | C1, C6, C8, C9 |
| 4 | CL10A475KO8NNNC | C_0603_1608Metric | C2, C4, C5, C7 |
| 1 | CL32A107MPVNNNE | C_1210_3225Metric | C3 |
| 3 | 0603WAF1002T5E | R_0603_1608Metric | R1, R4, R7 |
| 7 | 0603WAF1001T5E | R_0603_1608Metric | R2, R3, R5, R6, R8, R9, R10 |
Rpi board design files
The KiCad project lives in the elkel53930/daylight repository on GitHub; these links point at the commit this page was built from.
Rpi board: common questions
What microcontroller does the Rpi board use?
The Rpi board is built around the ComputeModule4, from the Raspberry Pi family.
How big is the Rpi board?
The Rpi board measures 70 × 66.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Rpi board?
32 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rpi board design files?
From the elkel53930/daylight repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rpi board design in my own project?
The repository has no license, so all rights stay with elkel53930. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rpi board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in daylight
Similar boards
Raspberry PiOpen source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7k
Raspberry PiSPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3k
Raspberry PiCM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0k
Raspberry PiHaxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license672
Raspberry PiDesktop 50 Pin TopConn
BlueSCSI
89.2 × 82.6 mm103 parts2LGPL-3.0449
Raspberry PiPowerBook
74.5 × 56.3 mm78 parts2LGPL-3.0449