53 open source boards using the 74LVC1G07SE-7

Real designs built with the 74LVC1G07SE-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

53 boardsClear filters|Most starred

How designs wire the 74LVC1G07SE-7

Read from the KiCad layouts of 35 open source designs, one per repository: what each pin of the 74LVC1G07SE-7 connects to, and the resistors, capacitors and other passives placed on it.

  • The Y_4 pin has a series resistor on 26 of 35 designs, most often 1 kΩ.
NCpin 1Connected to: Not connected 94%
GNDpin 3Connected to: GND 94%
Y_4pin 4Connected to: Signal 97%
  • Series resistor on 74% · 1 kΩ (24)
VCCpin 5Connected to: 3.3V 89%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Wall Panel by dotstartech, Mesh radio-Halow-LoRa by ties1887, Pi-In-The-Skyy by neatstranger and Libreboard by 256foundation.

The 74LVC1G07SE-7 in open source designs

The gallery holds 53 open source boards using the 74LVC1G07SE-7 from 38 GitHub repositories; a typical one measures about 140 × 90 mm and carries around 137 components.

85% use four copper layers or more, and 36% carry an open source license.

The most starred is Wall Panel by dotstartech.

Microcontrollers on boards using the 74LVC1G07SE-7

74LVC1G07SE-7: common questions

Where can I find a 74LVC1G07SE-7 reference design?

Each of the 53 boards on this page is a real design using the 74LVC1G07SE-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 74LVC1G07SE-7 Y_4 pin?

The Y_4 pin has a series resistor on 26 of 35 designs, most often 1 kΩ. Counted from the KiCad layouts of 35 open source designs using the 74LVC1G07SE-7.

What parts are used alongside the 74LVC1G07SE-7?

The RT9742GGJ5, TPD4EUSB30, AP22653W6, RT9742SNGV and FSUSB42MUX appear in the most repositories here.

Which microcontrollers do boards using the 74LVC1G07SE-7 use?

Most are built on Raspberry Pi (36), STM32 (5), ESP32 (4) and RP2040/RP2350 (1).

How big is a typical board using the 74LVC1G07SE-7?

The median is 140 × 90 mm, and 15% are two-layer designs.

What is the most popular open source board using the 74LVC1G07SE-7?

By GitHub stars, Wall Panel by dotstartech, with 366 stars.

Can I simulate one of these boards using the 74LVC1G07SE-7 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part