RP2040-Devboard
emdcomputer-crypto·RP2040-Devboard·Hardware/KicadProject5.kicad_pcb
About the RP2040-Devboard PCB
RP2040-Devboard is an open source RP2040/RP2350 PCB design by emdcomputer-crypto, published on GitHub. It is a 2-layer board measuring 21 × 51 mm, with 33 components from 16 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700x-330xxTT and W25Q16JVZPIQ TR. By type, the board carries 17 capacitors, 7 resistors, 4 connectors, 3 ICs, 1 crystal and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A custom RP2040 devboard designed in KiCad for Hack Club Half Life Week 5.
This is my custom RP2040 devboard for Hack Club Half Life week 5. I followed the guided devboard project and made my schematic and PCB in KiCad. The board has USB-C, an RP2040, flash memory, a 12 MHz crystal, an LDO and headers to get to the GPIO pins.
The RP2040 is the main chip on the board. It uses external flash memory to store the program and a 12 MHz crystal for its clock. USB-C brings power and the USB data connections onto the board. The LDO regulates the power for the 3.3V parts, and the headers bring the GPIO pins out so they can be used for other things.
Main components on the RP2040-Devboard
RP2040-Devboard bill of materials (BOM)
33 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1700x-330xxTT | SOT-23 | U1 |
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | W25Q16JVZPIQ TR | Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U3 |
| 1 | 12 MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | Conn_01x20 | PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 11 | 0.1uF | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 +3 |
| 2 | 1uF | C_0402_1005Metric | C9, C12 |
| 2 | 10uF | C_0603_1608Metric | C13, C14 |
| 2 | 33pF | C_0402_1005Metric | C15, C16 |
| 2 | 5.1K | R_0402_1005Metric | R1, R2 |
| 2 | 27 | R_0402_1005Metric | R3, R4 |
| 2 | 1K | R_0402_1005Metric | R5, R6 |
| 1 | 10K | R_0402_1005Metric | R7 |
RP2040-Devboard design files
The KiCad project lives in the emdcomputer-crypto/RP2040-Devboard repository on GitHub; these links point at the commit this page was built from.
RP2040-Devboard: common questions
What microcontroller does the RP2040-Devboard use?
The RP2040-Devboard is built around the RP2040, from the RP2040/RP2350 family.
How big is the RP2040-Devboard PCB?
The RP2040-Devboard measures 21 × 51 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RP2040-Devboard?
33 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the RP2040-Devboard design files?
From the emdcomputer-crypto/RP2040-Devboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RP2040-Devboard design in my own project?
The repository has no license, so all rights stay with emdcomputer-crypto. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RP2040-Devboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k