23 open source boards using the W25Q16JVZPIQ TR

Real designs built with the W25Q16JVZPIQ TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the W25Q16JVZPIQ TR

Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the W25Q16JVZPIQ TR connects to, and the resistors, capacitors and other passives placed on it.

  • The CS pin has a series resistor on 22 of 22 designs, most often 1 kΩ (then 10 kΩ).
  • The VCC pin has a decoupling capacitor on 22 of 22 designs, most often 100 nF (then 10 µF).
  • The CS pin has a pull-up to 3.3V on 21 of 22 designs, most often 10 kΩ (then 1 kΩ).
  • The EP pin is left unconnected on 21 of 22 designs.
CSpin 1Connected to: The microcontroller 95%
  • Series resistor on 100% · 1 kΩ (22), 10 kΩ (1)
  • Pull-up to 3.3V on 95% · 10 kΩ (20), 1 kΩ (1)
GNDpin 4Connected to: GND 100%
VCCpin 8Connected to: 3.3V 95%
  • Decoupling capacitor on 100% · 100 nF (74), 10 µF (6), 1 µF (2)
EPpin 9Connected to: Not connected 95%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Devobordo by Travis8795, Helix by Firestorm108, NorthernStudios-Custom-RP2040-Dev-Board with-Gyro by uzzambutt and Nano LoRa by AayanShaikh007.

The W25Q16JVZPIQ TR in open source designs

The gallery holds 23 open source boards using the W25Q16JVZPIQ TR from 22 GitHub repositories; a typical one measures about 21 × 51 mm and carries around 36 components.

87% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is Devobordo by Travis8795.

Parts used alongside the W25Q16JVZPIQ TR

Microcontrollers on boards using the W25Q16JVZPIQ TR

W25Q16JVZPIQ TR: common questions

Where can I find a W25Q16JVZPIQ TR reference design?

Each of the 23 boards on this page is a real design using the W25Q16JVZPIQ TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the W25Q16JVZPIQ TR CS pin?

The CS pin has a series resistor on 22 of 22 designs, most often 1 kΩ (then 10 kΩ). Counted from the KiCad layouts of 22 open source designs using the W25Q16JVZPIQ TR.

What decoupling capacitors do designs use on the W25Q16JVZPIQ TR VCC pin?

The VCC pin has a decoupling capacitor on 22 of 22 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 22 open source designs using the W25Q16JVZPIQ TR.

How is the W25Q16JVZPIQ TR EP pin connected?

The EP pin is left unconnected on 21 of 22 designs. Counted from the KiCad layouts of 22 open source designs using the W25Q16JVZPIQ TR.

What parts are used alongside the W25Q16JVZPIQ TR?

The RP2040, MCP1700x-330xxTT and NCP1117-3.3_SOT223 appear in the most repositories here.

Which microcontrollers do boards using the W25Q16JVZPIQ TR use?

Most are built on RP2040/RP2350 (22).

How big is a typical board using the W25Q16JVZPIQ TR?

The median is 21 × 51 mm, and 87% are two-layer designs.

What is the most popular open source board using the W25Q16JVZPIQ TR?

By GitHub stars, Devobordo by Travis8795, with 2 stars.

Can I simulate one of these boards using the W25Q16JVZPIQ TR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part