Sumador Restador 0-19
About the Sumador Restador 0-19 PCB
Sumador Restador 0-19 is an open source PCB design by EmersonEE, published on GitHub. It is a 2-layer board measuring 150 × 75 mm, with 26 components from 13 distinct parts.
Other key parts include the 74LS86, 74LS83, 74LS08, 74LS32 and 74LS04. By type, the board carries 11 resistors, 8 ICs, 3 switches, 2 LEDs, 1 connector and 1 capacitor.
Main components on the Sumador Restador 0-19
Sumador Restador 0-19 bill of materials (BOM)
26 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS86 | DIP-14_W7.62mm_LongPads | U1 |
| 2 | 74LS83 | DIP-16_W7.62mm_LongPads | U2, U3 |
| 1 | 74LS08 | DIP-14_W7.62mm_LongPads | U4 |
| 1 | 74LS32 | DIP-14_W7.62mm_LongPads | U5 |
| 1 | 74LS04 | DIP-14_W7.62mm_LongPads | U6 |
| 2 | 74LS47 | DIP-16_W7.62mm_LongPads | U7, U8 |
| 1 | VIN | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | BIT-A | SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW1 |
| 1 | BIT-B | SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW2 |
| 1 | SUMA-RESTA | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW3 |
| 2 | LTS-6960HR | 7SegmentLED_LTS6760_LTS6780 | AFF1, AFF2 |
| 1 | 470uF/16V | CP_Radial_D7.5mm_P2.50mm | C1 |
| 11 | 470 | 470 | R1, R2, R3, R4, R5, R6, R7, R8 +3 |
Sumador Restador 0-19 design files
The KiCad project lives in the EmersonEE/My_KiCad repository on GitHub; these links point at the commit this page was built from.
Sumador Restador 0-19: common questions
How big is the Sumador Restador 0-19 PCB?
The Sumador Restador 0-19 measures 150 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sumador Restador 0-19?
26 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sumador Restador 0-19 design files?
From the EmersonEE/My_KiCad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sumador Restador 0-19 design in my own project?
The repository has no license, so all rights stay with EmersonEE. Use it as a reference, and ask the author before reusing the design.
More boards in My_KiCad
ESP32ESP32 Dev V1.0
100 × 80 mm102 parts4LNo license0
ESP32Dispenador AguaESP32
117.2 × 147.8 mm87 parts2LNo license0
AVR/ArduinoDispensador Garrafones V2.0
200 × 90 mm87 parts2LNo license0
Corazon
130 × 116.8 mm86 parts2LNo license0
ESP32Caja-ESP32
198 × 83 mm78 parts2LNo license0
ESP32Fuente Simetrica
120.3 × 100 mm74 parts2LNo license0
ESP32MaxESP M
74 × 100 mm61 parts2LNo license0
Estroboscopico
98 × 125 mm60 parts2LNo license0
EXPANSOR DIP20
38 × 28.8 mm60 parts2LNo license0
ESP32ESP32 Trainer V2.0
100 × 70 mm53 parts2LNo license0
Show Carnet
150 × 100 mm20 parts2LNo license0