Dispensador Garrafones V2.0
About the Dispensador Garrafones V2.0 PCB
Dispensador Garrafones V2.0 is an open source AVR/Arduino PCB design by EmersonEE, published on GitHub. It is a 2-layer board measuring 200 × 90 mm, with 87 components from 35 distinct parts.
Its main chip is the Atmega328P-PU, from the AVR/Arduino family. Other key parts include the PC817, MOC3021M, MP1584, AMS1117-3.3 and ESP-01S. By type, the board carries 34 resistors, 13 ICs, 11 connectors, 11 capacitors, 9 diodes and 6 transistors.
Main components on the Dispensador Garrafones V2.0
Dispensador Garrafones V2.0 bill of materials (BOM)
87 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Atmega328P-PU | CERDIP-28_W7.62mm_SideBrazed_LongPads | U1 |
| 1 | ~ | LCD ST7920 | U2 |
| 4 | PC817 | DIP-4_W7.62mm | U3, U8, U11, U12 |
| 4 | MOC3021M | MOC3020 | U4, U5, U6, U7 |
| 1 | MP1584 | MP1584_Module | U9 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U10 |
| 1 | ESP-01S | ESP-01S | U13 |
| 4 | BT136-800 | TO-3P-3_Vertical | Q1, Q3, Q4, Q5 |
| 1 | TIP122 | TO-220-3_VDC | Q2 |
| 1 | 2N3906 | TO-92_Inline_Wide_EBC | Q6 |
| 1 | Crystal_16MHz | Crystal_HC49-4H_Vertical | Y1 |
| 5 | LOAD | AMASS_XT30U-F_1x02_P5.0mm_Vertical | J1, J2, J4, J5, J6 |
| 1 | LOAD | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | FICHERO | Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J7 |
| 3 | ~ | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J8, J9, J10 |
| 1 | JACK_DC | BarrelJack_GCT_DCJ200-10-A_Horizontal | J11 |
| 1 | Push_Button | SW_PUSH_6mm | SW1 |
| 1 | SW_DIP_x05 | SW_DIP_SPSTx05_Slide_9.78x14.88mm_W7.62mm_P2.54mm | SW2 |
| 6 | ~ | LED_D5.0mm | D1, D2, D4, D5, D6, D9 |
| 1 | 1N5817 | D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED | LED_G5.0mm | D7 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D8 |
| 2 | 22pF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2 |
| 4 | 10nF/400V | C_Rect_L13.0mm_W6.0mm_P10.00mm_FKS3_FKP3_MKS4 | C3, C4, C5, C6 |
| 3 | 100nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C7, C8, C9 |
| 2 | 10uF/50V | CP_Radial_D4.0mm_P2.00mm | C10, C11 |
| 6 | 10K | 10K | R1, R6, R25, R27, R28, R29 |
| 5 | 330 | 330 | R2, R3, R9, R12, R13 |
| 5 | 1k | 1K | R4, R24, R26, R33, R34 |
| 4 | 330 1/2W | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R10, R14, R15 |
| 6 | 470 | 470 | R7, R19, R20, R21, R22, R23 |
| 4 | 10 1/2W | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R8, R11, R16, R17 |
| 1 | 2.2k | 2.2K | R18 |
| 1 | 1K | 470 | R30 |
| 2 | 680ohm | 680 | R31, R32 |
Dispensador Garrafones V2.0 design files
The KiCad project lives in the EmersonEE/My_KiCad repository on GitHub; these links point at the commit this page was built from.
Dispensador Garrafones V2.0: common questions
What microcontroller does the Dispensador Garrafones V2.0 use?
The Dispensador Garrafones V2.0 is built around the Atmega328P-PU, from the AVR/Arduino family.
How big is the Dispensador Garrafones V2.0 PCB?
The Dispensador Garrafones V2.0 measures 200 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dispensador Garrafones V2.0?
87 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dispensador Garrafones V2.0 design files?
From the EmersonEE/My_KiCad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dispensador Garrafones V2.0 design in my own project?
The repository has no license, so all rights stay with EmersonEE. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Dispensador Garrafones V2.0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in My_KiCad
ESP32ESP32 Dev V1.0
100 × 80 mm102 parts4LNo license0
ESP32Dispenador AguaESP32
117.2 × 147.8 mm87 parts2LNo license0
Corazon
130 × 116.8 mm86 parts2LNo license0
ESP32Caja-ESP32
198 × 83 mm78 parts2LNo license0
ESP32Fuente Simetrica
120.3 × 100 mm74 parts2LNo license0
ESP32MaxESP M
74 × 100 mm61 parts2LNo license0
EXPANSOR DIP20
38 × 28.8 mm60 parts2LNo license0
Estroboscopico
98 × 125 mm60 parts2LNo license0
ESP32ESP32 Trainer V2.0
100 × 70 mm53 parts2LNo license0
Sumador Restador 0-19
150 × 75 mm26 parts2LNo license0
Show Carnet
150 × 100 mm20 parts2LNo license0
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746