HardLabs

LORA ile haberleşme

Emin-gunel·communication-with-lora·pcb/LORA ile haberleşme verici/LORA ile haberleşme.kicad_pcb

LORA ile haberleşme PCB layout, top view — open source Raspberry Pi board by Emin-gunel

About the LORA ile haberleşme PCB

LORA ile haberleşme is an open source Raspberry Pi PCB design by Emin-gunel, published on GitHub. It is a 4-layer board measuring 53 × 56 mm, with 7 components from 5 distinct parts.

Its main chip is the RaspberryPi_Pico_W, from the Raspberry Pi family. Other key parts include the Ai-Thinker-Ra-01 and BME280_mudülü. By type, the board carries 4 capacitors, 2 ICs and 1 module.

It belongs with the rf & radio designs in this gallery.

From the project

Lora ile veri aktarımı

Kısa açıklama Raspberry Pi Pico 2 W ve Ai-Thinker RA-01 (SX1278) kullanılarak, BME280 sensöründen alınan sıcaklık/nispi nem/basınç verilerinin LoRa P2P ile diğer bir Pico node'a gönderilip terminalde gösterilmesi amaçlanmıştır. Dengeli, sade ve doğrudan kullanılabilir bir proje yapısı sunar.

C++ standardı: C++17 (proje C++ ile yazılmıştır).

Bu parametreler LoRa link'i ve menzili doğrudan etkiler — gerekirse ayarlanabilir.

Main components on the LORA ile haberleşme

Ai-Thinker-Ra-01BME280_mudülüRaspberryPi_Pico_W

LORA ile haberleşme bill of materials (BOM)

7 components, 5 distinct parts.

QtyPartRefs
1
Ai-Thinker-Ra-01
U1
1
BME280_mudülü
U3
1
RaspberryPi_Pico_W
A1
2
100n
C1, C3
2
10u
C2, C4

LORA ile haberleşme design files

The KiCad project lives in the Emin-gunel/communication-with-lora repository on GitHub; these links point at the commit this page was built from.

LORA ile haberleşme: common questions

What microcontroller does the LORA ile haberleşme use?

The LORA ile haberleşme is built around the RaspberryPi_Pico_W, from the Raspberry Pi family.

How big is the LORA ile haberleşme PCB?

The LORA ile haberleşme measures 53 × 56 mm, has 4 copper layers and is 1.600198 mm thick.

How many components are on the LORA ile haberleşme?

7 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the LORA ile haberleşme design files?

From the Emin-gunel/communication-with-lora repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LORA ile haberleşme design in my own project?

The repository has no license, so all rights stay with Emin-gunel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LORA ile haberleşme without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in communication-with-lora

Similar boards