HardLabs

LORA ile Haberleşme alıcı

Emin-gunel·communication-with-lora·pcb/LORA ile Haberleşme alıcı/LORA ile Haberleşme alıcı.kicad_pcb

LORA ile Haberleşme alıcı PCB layout, top view — open source Raspberry Pi board by Emin-gunel

About the LORA ile Haberleşme alıcı PCB

LORA ile Haberleşme alıcı is an open source Raspberry Pi PCB design by Emin-gunel, published on GitHub. It is a 2-layer board measuring 51.2 × 51.9 mm, with 4 components from 4 distinct parts.

Its main chip is the RaspberryPi_Pico_W, from the Raspberry Pi family. Other key parts include the Ai-Thinker-Ra-01. By type, the board carries 2 capacitors, 1 IC and 1 module.

It belongs with the rf & radio designs in this gallery.

From the project

Lora ile veri aktarımı

Kısa açıklama Raspberry Pi Pico 2 W ve Ai-Thinker RA-01 (SX1278) kullanılarak, BME280 sensöründen alınan sıcaklık/nispi nem/basınç verilerinin LoRa P2P ile diğer bir Pico node'a gönderilip terminalde gösterilmesi amaçlanmıştır. Dengeli, sade ve doğrudan kullanılabilir bir proje yapısı sunar.

C++ standardı: C++17 (proje C++ ile yazılmıştır).

Bu parametreler LoRa link'i ve menzili doğrudan etkiler — gerekirse ayarlanabilir.

Main components on the LORA ile Haberleşme alıcı

Ai-Thinker-Ra-01RaspberryPi_Pico_W

LORA ile Haberleşme alıcı bill of materials (BOM)

4 components, 4 distinct parts.

QtyPartRefs
1
Ai-Thinker-Ra-01
U1
1
RaspberryPi_Pico_W
A1
1
100n
C1
1
10u
C2

LORA ile Haberleşme alıcı design files

The KiCad project lives in the Emin-gunel/communication-with-lora repository on GitHub; these links point at the commit this page was built from.

LORA ile Haberleşme alıcı: common questions

What microcontroller does the LORA ile Haberleşme alıcı use?

The LORA ile Haberleşme alıcı is built around the RaspberryPi_Pico_W, from the Raspberry Pi family.

How big is the LORA ile Haberleşme alıcı PCB?

The LORA ile Haberleşme alıcı measures 51.2 × 51.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LORA ile Haberleşme alıcı?

4 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the LORA ile Haberleşme alıcı design files?

From the Emin-gunel/communication-with-lora repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LORA ile Haberleşme alıcı design in my own project?

The repository has no license, so all rights stay with Emin-gunel. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LORA ile Haberleşme alıcı without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in communication-with-lora

Similar boards