7 open source boards using the Ai-Thinker-Ra-01

Real designs built with the Ai-Thinker-Ra-01, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the Ai-Thinker-Ra-01

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the Ai-Thinker-Ra-01 connects to, and the resistors, capacitors and other passives placed on it.

  • The DIO3 pin is left unconnected on 4 of 5 designs.
  • The DIO5 pin is left unconnected on 4 of 5 designs.
  • The VDD pin has a decoupling capacitor on 3 of 5 designs, most often 10 µF (then 100 nF).
  • The DIO1 pin is left unconnected on 3 of 5 designs (a signal on 2).
GNDpin 2, 9, 16Connected to: GND 100%
VDDpin 3Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 10 µF (4), 100 nF (2)
DIO1pin 6Connected to: Not connected 60% · a signal 40%
DIO2pin 7Connected to: Not connected 60% · a signal 40%
DIO3pin 8Connected to: Not connected 80% · a signal 20%
DIO4pin 10Connected to: Not connected 60% · a signal 40%
DIO5pin 11Connected to: Not connected 80% · a signal 20%

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RA-01-LoRa by SpyrosCpt, Pi hat LoRa by Doenec, Hyperactive radio by activexray and LORA ile haberleşme by Emin-gunel.

The Ai-Thinker-Ra-01 in open source designs

The gallery holds 7 open source boards using the Ai-Thinker-Ra-01 from 5 GitHub repositories; a typical one measures about 65 × 56 mm and carries around 52 components.

57% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.

The most starred is RA-01-LoRa by SpyrosCpt.

Microcontrollers on boards using the Ai-Thinker-Ra-01

What boards using the Ai-Thinker-Ra-01 are built for

Ai-Thinker-Ra-01: common questions

Where can I find a Ai-Thinker-Ra-01 reference design?

Each of the 7 boards on this page is a real design using the Ai-Thinker-Ra-01. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the Ai-Thinker-Ra-01 DIO3 pin connected?

The DIO3 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the Ai-Thinker-Ra-01.

How is the Ai-Thinker-Ra-01 DIO5 pin connected?

The DIO5 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the Ai-Thinker-Ra-01.

What decoupling capacitors do designs use on the Ai-Thinker-Ra-01 VDD pin?

The VDD pin has a decoupling capacitor on 3 of 5 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the Ai-Thinker-Ra-01.

Which microcontrollers do boards using the Ai-Thinker-Ra-01 use?

Most are built on Raspberry Pi (2) and RP2040/RP2350 (1).

How big is a typical board using the Ai-Thinker-Ra-01?

The median is 65 × 56 mm, and 57% are two-layer designs.

What is the most popular open source board using the Ai-Thinker-Ra-01?

By GitHub stars, RA-01-LoRa by SpyrosCpt, with 2 stars.

Can I simulate one of these boards using the Ai-Thinker-Ra-01 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part