PJ Integrador 3

EmmanuelRGuesser·PJ_Integrador_3·PCB/ProjetoPI3.kicad_pcb

PJ Integrador 3 PCB layout, top view — open source ESP32 board by EmmanuelRGuesser

About the PJ Integrador 3 PCB

PJ Integrador 3 is an open source ESP32 PCB design by EmmanuelRGuesser, published on GitHub. It is a 2-layer board measuring 100 × 78 mm, with 14 components from 12 distinct parts.

Its main chip is the ESP32-S3-DevKitC, from the ESP32 family. By type, the board carries 4 connectors, 3 diodes, 3 resistors, 1 IC, 1 transistor and 1 relay.

It belongs with the iot & wireless and displays & leds designs in this gallery.

From the project

Projeto de medidor de consumo enérgetico residencial desenvolvido para ESP32

Este projeto tem como objetivo realizar o projeto e implementação de um dispositivo de monitoramento do consumo energético de tomadas residenciais integrado ao Home Assistant.

Dispositivos como esse permitem aos usuários monitorar e controlar o consumo de energia, ajudando a identificar aparelhos que consomem muita energia e incentivar hábitos mais sustentáveis. Isso resulta em uma redução significativa na fatura de energia e contribui para a conservação de recursos naturais.

PJ Integrador 3, from the project README
From the project README

Main components on the PJ Integrador 3

PJ Integrador 3 bill of materials (BOM)

14 components, 12 distinct parts.

QtyPartRefs
1
ESP32-S3-DevKitC
U2
1
BC547
Q1
1
Fonte AC
J1
1
PZEM-004T
J2
1
LCD
J3
1
Carga
J5
1
Rele
K1
1
HLK-5M05
PS1
1
LED VERMELHO
D1
1
LED VERDE
D2
1
1N4007
D3
3
1K
R1, R2, R3

PJ Integrador 3 design files

The KiCad project lives in the EmmanuelRGuesser/PJ_Integrador_3 repository on GitHub; these links point at the commit this page was built from.

PJ Integrador 3: common questions

What microcontroller does the PJ Integrador 3 use?

The PJ Integrador 3 is built around the ESP32-S3-DevKitC, from the ESP32 family.

How big is the PJ Integrador 3 PCB?

The PJ Integrador 3 measures 100 × 78 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PJ Integrador 3?

14 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the PJ Integrador 3 design files?

From the EmmanuelRGuesser/PJ_Integrador_3 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PJ Integrador 3 design in my own project?

The repository has no license, so all rights stay with EmmanuelRGuesser. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PJ Integrador 3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards