Simple step load
About the Simple step load PCB
Simple step load is an open source PCB design by ep-infosec, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 30 × 30 mm, with 19 components from 9 distinct parts.
By type, the board carries 9 connectors, 5 resistors, 2 transistors, 1 switch, 1 diode and 1 capacitor.
From the project
This repository houses various things (3D models, circuits, class materials) that we've created for use in Google makerspaces.
This repository houses various things (3D models, circuits, class materials) that we've created for use in Google makerspaces.
If you'd like to contribute, see CONTRIBUTING
Simple step load bill of materials (BOM)
19 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Q_PNP_BEC | SOT-23_Handsoldering | Q1 |
| 1 | Q_NMOS_GSD | SOT-23_Handsoldering | Q2 |
| 3 | CONN_01X02 | Pin_Header_Straight_1x02_Pitch2.54mm | J1, J2, J8 |
| 5 | CONN_01X03 | Pin_Header_Straight_1x03_Pitch2.54mm | J3, J4, J5, J6, J7 |
| 1 | Outline | Board_Outline_30mm_Square | P1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | D | D_SOD-323_HandSoldering | D1 |
| 1 | 0.1u | C_0805 | C1 |
| 5 | R | Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | R1, R2, R3, R4, R5 |
Simple step load design files
The KiCad project lives in the ep-infosec/50_google_makerspace-partsbin repository on GitHub; these links point at the commit this page was built from.
Simple step load: common questions
How big is the Simple step load PCB?
The Simple step load measures 30 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Simple step load?
19 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Simple step load design files?
From the ep-infosec/50_google_makerspace-partsbin repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Simple step load design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which ep-infosec chose for the repository.
More boards in 50_google_makerspace-partsbin
High current 1
71.8 × 54.6 mm66 parts2LCC-BY-4.00
Esp32 button
44 × 44 mm56 parts2LCC-BY-4.00
ESP8266Esp8266 button
40 × 50 mm35 parts2LCC-BY-4.00
Tp5410 breakout
30 × 30 mm27 parts2LCC-BY-4.00
Mp2303 breakout
30 × 30 mm18 parts2LCC-BY-4.00
AVR/ArduinoSmd class
30 × 30 mm16 parts2LCC-BY-4.00
Led board
55.4 × 29.5 mm13 parts2LCC-BY-4.00
Square grid board
50 × 50 mm11 parts2LCC-BY-4.00
Sx1308 breakout
30 × 30 mm11 parts2LCC-BY-4.00
Hangbot breakout
42 × 42 mm8 parts2LCC-BY-4.00
Smd proto
34 × 49 mm6 parts2LCC-BY-4.00