SDCardShield
About the SDCardShield PCB
SDCardShield is an open source PCB design by epaell, published on GitHub. It is a 2-layer board measuring 139.8 × 53.3 mm, with 20 components from 17 distinct parts.
By type, the board carries 11 connectors, 3 LEDs, 3 resistors, 2 switches and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
https://core-electronics.com.au/adafruit-ds3231-precision-rtc-breakout.html
https://core-electronics.com.au/adafruit-ds3231-precision-rtc-breakout.html
https://core-electronics.com.au/microsd-card-breakout-board.html
SDCardShield bill of materials (BOM)
20 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MicroSD | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | RTC | PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | MECB | IDC-Header_2x12_P2.54mm_Vertical | J3 |
| 1 | PS/2 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Digital | PinSocket_2x18_P2.54mm_Vertical | P1 |
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | P2 |
| 2 | Analog | PinSocket_1x08_P2.54mm_Vertical | P3, P4 |
| 1 | PWM | PinSocket_1x10_P2.54mm_Vertical | P5 |
| 1 | PWM | PinSocket_1x08_P2.54mm_Vertical | P6 |
| 1 | Comm | PinSocket_1x08_P2.54mm_Vertical | P7 |
| 1 | OPTIONS | SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW1 |
| 1 | RESET | SW_Push_2P1T_Toggle_CK_PVA1xxH1xxxxxxV2 | SW2 |
| 1 | GREEN | LED_D5.0mm | LED1 |
| 1 | YELLOW | LED_D5.0mm | LED2 |
| 1 | RED | LED_D5.0mm | LED3 |
| 1 | 100nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 3 | 220R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
SDCardShield design files
The KiCad project lives in the epaell/MECB repository on GitHub; these links point at the commit this page was built from.
SDCardShield: common questions
How big is the SDCardShield PCB?
The SDCardShield measures 139.8 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SDCardShield?
20 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the SDCardShield design files?
From the epaell/MECB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SDCardShield design in my own project?
The repository has no license, so all rights stay with epaell. Use it as a reference, and ask the author before reusing the design.
More boards in MECB
MECB SID
99.8 × 99.8 mm37 parts2LNo license6
MECB IO
99.8 × 99.8 mm33 parts2LNo license6
MECB Z80 CPU
99.8 × 99.8 mm23 parts2LNo license6
MECB 8088 CPU
99.8 × 99.8 mm22 parts2LNo license6
ESP32MECB Fujinet
99.8 × 99.8 mm18 parts2LNo license6
MECB 68008 CPU
99.8 × 99.8 mm18 parts2LNo license6
MECB IDE
99.8 × 99.8 mm16 parts2LNo license6
68008test
80 × 67.5 mm16 parts2LNo license6
MECB KB
99.8 × 99.8 mm15 parts2LNo license6
PICMECB 6800 CPU
99.8 × 99.8 mm14 parts2LNo license6
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979