9 open source boards using the LMP7721
Real designs built with the LMP7721, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
IONPAK V2
m-labs
201.2 × 84.7 mm259 parts4LNo license23LIA
JasMoH
290.9 × 87.4 mm295 parts2LGPL-3.05AVR/Arduino
GlazerLab KStat
nfroehberg
139.7 × 41.9 mm116 parts2LNo license0IONPAK1
m-labs
198.6 × 84.7 mm246 parts4LNo license23LNA test
JasMoH
70.4 × 35.3 mm109 parts2LGPL-3.05Sensor dmf board
esyywar
100 × 90 mm46 parts4LNo license2Amplifier
EpicQuestBio
55 × 52 mm39 parts2LAGPL-3.00Amplifier
LokiMetaSmith
55 × 52 mm39 parts2LAGPL-3.00Solder test
JasMoH
14.7 × 15.2 mm8 parts2LGPL-3.05
How designs wire the LMP7721
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LMP7721 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 4 has a series resistor on 6 of 6 designs, most often 1 MΩ (then 100 Ω).
- Pin 4 has a series capacitor on 6 of 6 designs, most often 2 pF (then 10 pF).
- Pin 5 is left unconnected on 6 of 6 designs.
- The V+_6 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| +_1pin 1 | Connected to: AD4011BCPZ-RL7 33%, LTC6268IS8#TRPBF 33% · 2V 17% |
|
| NC_2pin 2 | Connected to: A connector 33% · GND 17% · VREF_FLU 17% |
|
| V-_3pin 3 | Connected to: GND 67% · a signal 33% | — |
| Pin 4 | Connected to: Signal 100% |
|
| Pin 5 | Connected to: Not connected 100% | — |
| V+_6pin 6 | Connected to: VDDA 67% · a signal 33% |
|
| NC_7pin 7 | Connected to: A connector 33% · GND 17% · VREF_FLU 17% |
|
| -_8pin 8 | Connected to: Signal 83% · VREF_FLU 17% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include IONPAK1 by m-labs, LIA by JasMoH, Sensor dmf board by esyywar and Amplifier by EpicQuestBio.
The LMP7721 in open source designs
The gallery holds 9 open source boards using the LMP7721 from 6 GitHub repositories; a typical one measures about 100 × 52 mm and carries around 109 components.
67% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is IONPAK V2 by m-labs.
Parts used alongside the LMP7721
Microcontrollers on boards using the LMP7721
LMP7721: common questions
Where can I find a LMP7721 reference design?
Each of the 9 boards on this page is a real design using the LMP7721. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LMP7721 pin 4?
Pin 4 has a series resistor on 6 of 6 designs, most often 1 MΩ (then 100 Ω). Counted from the KiCad layouts of 6 open source designs using the LMP7721.
How is the LMP7721 pin 5 connected?
Pin 5 is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the LMP7721.
What decoupling capacitors do designs use on the LMP7721 V+_6 pin?
The V+_6 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the LMP7721.
What parts are used alongside the LMP7721?
The AD4011BCPZ-RL7, ADA4940-1ACPZ-RL, LP5907MFX-1.8/NOPB and LTC6268IS8#TRPBF appear in the most repositories here.
Which microcontrollers do boards using the LMP7721 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the LMP7721?
The median is 100 × 52 mm, and 67% are two-layer designs.
What is the most popular open source board using the LMP7721?
By GitHub stars, IONPAK V2 by m-labs, with 23 stars.
Can I simulate one of these boards using the LMP7721 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.