Mainboard
equipe-paralela·sumo-hardware·kicad/projects/mainboard/mainboard.kicad_pcb
About the Mainboard PCB
Mainboard is an open source ESP32 PCB design by equipe-paralela, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 55 × 70 mm, with 84 components from 23 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the KF33BDT and CD74HC4067M. By type, the board carries 27 resistors, 17 switches, 13 diodes, 12 capacitors, 8 connectors and 4 ICs.
From the project
3Kg Sumo Hardware
Main components on the Mainboard
Mainboard bill of materials (BOM)
84 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | Regulator_DC-DC_MINI-360 | U1 |
| 1 | KF33BDT | Regulator_KF33BD-TR | U2 |
| 1 | CD74HC4067M | SOIC-24W_7.5x15.4mm_P1.27mm | U3 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U4 |
| 1 | MICRO_START | Connector_JST_ZH_B3B-ZR_1x03_P1.50mm_Vertical | J1 |
| 1 | LRGB | Connector_JST_ZH_B4B-ZR_1x04_P1.50mm_Vertical | J2 |
| 1 | ESC_L | PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | CONN_02X08_ODD_EVEN Conn_02x08_Odd_Even | PinSocket_2x08_P2.54mm_Vertical | J4 |
| 1 | ESC_R | PinSocket_1x03_P2.54mm_Vertical | J7 |
| 1 | ENC_R | Connector_JST_ZH_B3B-ZR_1x03_P1.50mm_Vertical | J8 |
| 1 | ENC_L | Connector_JST_ZH_B3B-ZR_1x03_P1.50mm_Vertical | J9 |
| 1 | USB_C | Connector_USB-C | P1 |
| 2 | JUMPER_2_OPEN Jumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP3 |
| 1 | FS-IA6 FS-iA6 | Receiver_FS-iA6 | RC1 |
| 16 | CONN_01X03 Conn_01x03 | Connector_JST_ZH_B3B-ZR_1x03_P1.50mm_Vertical | S01, S02, S03, S04, S05, S06, S07, S08 +8 |
| 1 | SW_Push | SW_SPST_PTS810 | SW1 |
| 3 | BLUE_2V6 | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3 |
| 2 | LESD5D5.0CT1G | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5 |
| 8 | WS2812B-4020-G1 | LED_WS2812B-4020 | D6, D7, D8, D9, D10, D11, D12, D13 |
| 8 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C6, C7, C8, C9, C10 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 10u 16V | CP_Radial_D5.0mm_P2.00mm | C4, C5, C11, C12 |
| 10 | 20K 20k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R4, R6, R8, R10, R12, R14 +2 |
| 17 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R5, R7, R9, R11, R13, R15, R16 +9 |
Mainboard design files
The KiCad project lives in the equipe-paralela/sumo-hardware repository on GitHub; these links point at the commit this page was built from.
Mainboard: common questions
What microcontroller does the Mainboard use?
The Mainboard is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Mainboard PCB?
The Mainboard measures 55 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mainboard?
84 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mainboard design files?
From the equipe-paralela/sumo-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mainboard design in my own project?
Yes, under the terms of its GPL-3.0 license, which equipe-paralela chose for the repository.
Can I test firmware for the Mainboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in sumo-hardware
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k