51 open source boards using the CD74HC4067M
Real designs built with the CD74HC4067M, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
TSynth Teensy 4.1
Electrotechnique
312 × 140 mm105 parts2LNo license180RP2040/RP2350
16nx
16n-faderbank
248.9 × 120.7 mm151 parts2LCustom license76Raspberry Pi
EavesDrum
tobigun
100 × 100 mm94 parts2LGPL-3.024Chessboard
aaravs-s
400 × 100 mm34 parts2LNo license5STM32
Faderbay
vonmartins
360 × 140 mm174 parts4LNo license4WEASEL
joebmz98
335 × 200 mm216 parts2LMIT3ESP32
Mainboard
tr0fin0
55 × 70 mm84 parts2LGPL-3.03VAJRA 16-ir-Sensor-Array- Advance- LFR
sarthakchikte0312
137.8 × 91.2 mm50 parts2LNo license3ESP32
Nixie-Controller v2
DanielHeEGG
220 × 65 mm201 parts4LCC-BY-SA-4.02Arpeggiator
EwoudVV
220 × 170 mm350 parts2LNo license1RP2040/RP2350
VNTR-65
FanieVenter
370 × 120 mm126 parts2LNo license1FreeMacro
pentodeman
100 × 92 mm119 parts2LGPL-3.01ESP32
T8-Sequencer
lluisestape-upc
290 × 210 mm96 parts2LMIT1ESP32
Mainboard
equipe-paralela
55 × 70 mm84 parts2LGPL-3.01NXP
JMR-800 JX8P Controller Board
calphool
93.5 × 124.5 mm57 parts2LNo license1RP2040/RP2350
Reason ssl midi controller
yves-obreykov
122 × 124.6 mm46 parts2LMIT1Posture pad
HusseinKhodor03
102 × 71.5 mm22 parts2LGPL-3.01ESP32
Glove v4-routing candidate
latintzar
100 × 80 mm561 parts8LMIT0SoundLab16StepSequencer
JakeBoothy
314.9 × 110 mm348 parts4LNo license0ESP32
Sunboard
seanlim
173.5 × 226.9 mm319 parts2LNo license0Tiramisu
esicoe
154.1 × 147 mm312 parts4LNo license0CoreLight
llextv
170.7 × 119 mm192 parts4LNo license0NXP
Meepolab
meepodeep
125.5 × 67.5 mm192 parts4LMIT0ESP32
Stepper synth
udu3324
266.7 × 81 mm182 parts2LGPL-3.00Raspberry Pi
R3M1XXX
jvegaf
50 × 110 mm180 parts2LNo license0Sequencer
gehel
163 × 116.5 mm154 parts4LNo license0AVR/Arduino
FCU Mainboard v3
stefanofinetti
270 × 100 mm136 parts2LGPL-3.00Midi controller
petitechose-midi-studio
164 × 164 mm112 parts4LCERN-OHL-S-2.00RP2040/RP2350
Deck module
Hibernathan1212
131.5 × 167.5 mm51 parts2LNo license0MC8P Mini
joebmz98
139.3 × 67.5 mm35 parts2LMIT0AVR/Arduino
Automatic-Chessboard
RONITERVO
200 × 52.2 mm14 parts2LCC-BY-NC-4.00Multi-Touch-Kit-ProMicro
CcydtN
119.4 × 62 mm12 parts2LMIT0Testjig
plinkysynth
157.5 × 115.8 mm79 parts2LMIT221Arcade board
cester-ino
130 × 36.5 mm20 parts2LGPL-3.031Testjig
ember-labs-io
157.5 × 115.8 mm79 parts2LCC-BY-SA-4.019WEASEL KiCad MainBoard
joebmz98
335 × 200 mm216 parts2LMIT3
How designs wire the CD74HC4067M
Read from the KiCad layouts of 38 open source designs, one per repository: what each pin of the CD74HC4067M connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 23 of 38 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 12 | Connected to: GND 100% | — |
| VCCpin 24 | Connected to: 3.3V 92% |
|
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Testjig by plinkysynth, TSynth Teensy 4.1 by Electrotechnique, 16nx by 16n-faderbank and Arcade board by cester-ino.
The CD74HC4067M in open source designs
The gallery holds 51 open source boards using the CD74HC4067M from 39 GitHub repositories; a typical one measures about 131.5 × 92 mm and carries around 94 components.
69% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Testjig by plinkysynth.
Parts used alongside the CD74HC4067M
Microcontrollers on boards using the CD74HC4067M
What boards using the CD74HC4067M are built for
CD74HC4067M: common questions
Where can I find a CD74HC4067M reference design?
Each of the 51 boards on this page is a real design using the CD74HC4067M. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the CD74HC4067M VCC pin?
The VCC pin has a decoupling capacitor on 23 of 38 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 38 open source designs using the CD74HC4067M.
What parts are used alongside the CD74HC4067M?
The AMS1117-3.3, USBLC6-2SC6, 40106, 4013 and 40193 appear in the most repositories here.
Which microcontrollers do boards using the CD74HC4067M use?
Most are built on ESP32 (11), RP2040/RP2350 (5), NXP (4) and Nordic nRF (3).
How big is a typical board using the CD74HC4067M?
The median is 131.5 × 92 mm, and 69% are two-layer designs.
What is the most popular open source board using the CD74HC4067M?
By GitHub stars, Testjig by plinkysynth, with 221 stars.
Can I simulate one of these boards using the CD74HC4067M before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.