Umich balloons aprs
EricAndrechek·umich-balloons·balloon-tracker/hardware/umich_balloons_aprs/umich_balloons_aprs.kicad_pcb
About the Umich balloons aprs PCB
Umich balloons aprs is an open source PCB design by EricAndrechek, published on GitHub. It is a 2-layer board measuring 66 × 53.3 mm, with 11 components from 10 distinct parts.
By type, the board carries 5 capacitors, 3 inductors, 2 connectors and 1 diode.
It belongs with the rf & radio designs in this gallery.
From the project
An open-source, modular, Arduino-based tracking system (designed for use on high-altitude weather balloons) with LoRa, APRS, Iridium RockBLOCKs, and cellular data transmission capabilities to a mapping server, ground stations, and vehicle trackers.
Umich balloons aprs bill of materials (BOM)
11 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_Coaxial | SMA_Wurth_60312002114503_Vertical | J1 |
| 1 | Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | ~ | DORJI_DRA818V | D1 |
| 1 | 1.5UH 56 nH | L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | L1 |
| 1 | 68 nH | L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | L2 |
| 1 | 56 nH | L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | L3 |
| 1 | 0.1UF 2.2 µF | CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 0.1U 20 pF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 2 | 10UF 36 pF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
| 1 | 22UF 20 pF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
Umich balloons aprs design files
The KiCad project lives in the EricAndrechek/umich-balloons repository on GitHub; these links point at the commit this page was built from.
Umich balloons aprs: common questions
How big is the Umich balloons aprs PCB?
The Umich balloons aprs measures 66 × 53.3 mm, has 2 copper layers and is 1.69 mm thick.
How many components are on the Umich balloons aprs?
11 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Umich balloons aprs design files?
From the EricAndrechek/umich-balloons repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Umich balloons aprs design in my own project?
The repository has no license, so all rights stay with EricAndrechek. Use it as a reference, and ask the author before reusing the design.
More boards in umich-balloons
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568