Umich balloons power
EricAndrechek·umich-balloons·balloon-tracker/hardware/umich_balloons_power/umich_balloons_power.kicad_pcb
About the Umich balloons power PCB
Umich balloons power is an open source PCB design by EricAndrechek, published on GitHub. It is a 2-layer board measuring 66 × 53.3 mm, with 17 components from 12 distinct parts.
Other key parts include the TPS63070 and MCP23008-XSO. By type, the board carries 9 capacitors, 5 resistors, 2 ICs and 1 inductor.
It belongs with the rf & radio designs in this gallery.
From the project
An open-source, modular, Arduino-based tracking system (designed for use on high-altitude weather balloons) with LoRa, APRS, Iridium RockBLOCKs, and cellular data transmission capabilities to a mapping server, ground stations, and vehicle trackers.
Main components on the Umich balloons power
Umich balloons power bill of materials (BOM)
17 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS63070 tps63070 | VQFN-HR-15 | U1 |
| 1 | MCP23008-XSO MCP23008-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U2 |
| 1 | 1.5UH 1.5uH | L_Coilcraft_XxL4020 | L1 |
| 1 | 0.1UF 0.1uF | C_0603_1608Metric | C1 |
| 1 | 0.1U 0.1u | C_0805_2012Metric | C2 |
| 3 | 10UF 10uF | C_0805_2012Metric | C3, C9, C10 |
| 1 | 10UF 10uF | C_0603_1608Metric | C4 |
| 3 | 22UF 22uF | C_0805_2012Metric | C5, C6, C7 |
| 2 | 10K 10k | R_0603_1608Metric | R1, R2 |
| 1 | 150K 150k | R_0603_1608Metric | R3 |
| 1 | 470K 470k | R_0603_1608Metric | R4 |
| 1 | 100K 100k | R_0603_1608Metric | R5 |
Umich balloons power design files
The KiCad project lives in the EricAndrechek/umich-balloons repository on GitHub; these links point at the commit this page was built from.
Umich balloons power: common questions
How big is the Umich balloons power PCB?
The Umich balloons power measures 66 × 53.3 mm, has 2 copper layers and is 1.69 mm thick.
How many components are on the Umich balloons power?
17 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Umich balloons power design files?
From the EricAndrechek/umich-balloons repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Umich balloons power design in my own project?
The repository has no license, so all rights stay with EricAndrechek. Use it as a reference, and ask the author before reusing the design.
More boards in umich-balloons
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568